Linksys WVC200 Cisco WVC200 2.4 GHz Wireless-G PTZ Internet Camera with Audio - Page 41

Configuring Software Mail & FTP Secondary SMTP • Secondary SMTP - Check the box to upload to the Secondary SMTP if the camera can not connect to the primary SMTP. • SMTP Mail Server - Enter the address of the SMTP (Simple Mail Transport Protocol) Server to be used to send e-mail. • Port - Enter the port number for the mail server, the default is 25. • Authentication - Check the box if your mail server requires authentication and enter the following options: - Account Name- Enter the account name to be used on the email server. - Password - Enter the password associated with the account name. E-mail Setup • Send To - Enter at least one (1) e-mail address; the 2nd and 3rd addresses are optional. The e-mail alert will be sent to the e-mail address or addresses specified here. • Show "From" as - Enter the e-mail address to be shown in the From field when the email is received. • Subject - Enter the desired text to be shown as the subject for the e-mail when it is received FTP Alert NOTE: Only one FTP server is used, even if both the primary and secondary FTP servers are enabled. Primary FTP • FTP Server - Enter the address of the primary FTP Server. • Login Name - Enter the login name associated with the specified primary FTP server. • Password - Enter the password associated with the login name for the primary FTP server. • Enable Passive Mode - Check the box to enable the Passive mode feature. (This is a more secure mode of the ftp protocol) • File Path Name - Enter the desired file path name on the primary FTP server. Secondary FTP • Secondary FTP - Enable this option to allow the camera to connect to a secondary FTP server if the primary FTP server is not available WVC200-210 User Guide 37