Logitech BH870 User's Guide - Page 20
Controlling the Speaker Volume and Microphone, 6.7 Switching between Your Phone and Headset
View all Logitech BH870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Attaching a Head- or Neckband (Optional) To attach a head- or neckband, do the following: 1. Remove the current wearing-style attachment, if any. 2. Align the earbud and headset fitting with the matching holes on the head- or neckband, and press until it clicks into place. 3. Put on the headset and rotate the microphone until it is as close as possible to your mouth. Figure 15: Attaching the headset to a head- or neckband Removing a Wearing-style Attachment To remove a wearing-style attachment, perform the opposite procedure used to attach it. 7.3 Replacing the Earbud After extensive use, the earbud of the BH870 Headset may become worn, dirty, or uncomfortable. The headset includes two extra, differently-shaped earbuds. Otherwise, you can order additional replacements from www.jabra.com at any time. To remove the earbud, hold the headset with the earbud facing you and twist the earbud gently anti-clockwise until it comes free. Then align the replacement earbud onto the same fitting and gently press it down until it clicks into place (do not rotate). 7.4 Using the BH870 Headset with Other Bluetooth Devices Pairing the Headset with a Mobile Phone The BH870 Headset is based on Bluetooth wireless technology and can therefore be used with any mobile phone that supports Bluetooth. You must set up the wireless communication between the two devices by pairing them. See 4.3 Pairing the Headset with Your Mobile Phone for complete instructions. Pairing the Headset with the USB Bluetooth Adapter To pair the headset to the USB Bluetooth Adapter connected to your computer, place both units in pairing mode while they are close to each other. They will find each other automatically, and then pair and connect to each other as needed. See 9.3 Pairing the USB Bluetooth Adapter and Headset for complete details. Managing Bluetooth Connections Once you have paired the headset with a mobile phone and the USB Bluetooth Adapter, the headset usually manages its Bluetooth connections automatically. However, if the headset and mobile phone are paired, turned on, and in range but fail to connect automatically, you can try to connect them manually using the menu system on your mobile phone, as described in your phone's documentation. You can drop the connection from the headset to your mobile phone (for example, because you would like to connect your mobile phone to another device) in a similar way. See also 7.12 Managing Bluetooth Connections and the Pairing Table. 7.5 Headset Controls and Signals The BH870 Headset features a collection of controls and indicators that enable you to manage and monitor your calls. These controls and indicators include the following: 1. Multifunction Button This button is located near the back of the headset. Through a combination of taps, double-taps, short presses, and long presses, you will be able to execute all of the most-needed functions, including answering a call, hanging up, switching between held calls, and more. 2. Touch Panel This touch-sensitive panel is similar to the touch pad included with many laptop computers. It enables you to adjust the speaker volume and mute/unmute the microphone. BH870 Wireless Bluetooth® Headset User's Guide 20