Logitech Wireless DJ Music System Manual - Page 8

Logitech® Wireless DJ™ Music System User's Guide 3 Turn On the Wireless DJ Remote • When prompted by the Setup Wizard, insert the battery into the Wireless DJ remote to turn it on. • On the LCD screen of the remote you should see a "Trying to Connect" screen followed by a "Connection Successful" screen (see LCD Screens - Initial Connection later in this manual for more details). • A green checkmark in the Setup Wizard verifies the wireless connection with the PC. • After establishing a connection, the StreamPoint software checks the firmware version of the remote. If required, at this point you will be guided through the necessary steps to update the firmware. Note Be sure to remove the transparent film from the front of the remote's LCD screen before trying to use it. 4 Turn On the Music Receiver / Dock • When prompted by the Setup Wizard, connect the supplied power cable and adapter to the back of the Music Receiver / Dock, and then plug the power adapter into an� �A��C� outlet. • The Music Receiver / Dock must be less than 50 meters (150 feet) from the USB Music Transmitter. (The maximum effective range depends on a number of environmental factors, and will probably be less than this distance.) The receiver LED is initially red, and turns blue after achieving a successful wireless connection. • Verify the connection when a green checkmark appears in the Setup Wizard. 5 Connect the Music Receiver / Dock to Your Stereo • When prompted by the Setup Wizard, connect the Music Receiver / Dock to your stereo amplifier using the included RCA audio cable. Alternatively, you can connect to powered multimedia speakers using the stereo-mini (3.5 mm) output on the back of the Receiver / Dock. • Using the Setup Wizard, test the Logitech Wireless DJ �M����u��s��i�c S��y��s��t�e���m b���y���p����la��y��in�g��a��s�h�o��r�t�t�e�s�t��so��n�g� (click on the Play Test button).  English