Maytag MED6600TQ Use and Care Guide - Page 22

NOTEA:defautlitmeisdisplayewdhenanautomatcicycleisselecteDdu. ringthefirst fewminuteosfthedryingprocestsh,ecycletimemayautomaticavlalyryfromthedefault timebaseodnthesizeandfabrictypeoftheload[.bwardtheendofthedryingprocess, theestimatetimd edisplawy illadjusatgains,howintghefinaldryingtime. To use a Sensor Dry Cycle Press TEMP until the desired temperature illuminates. • NIGH • MEDIUM • ow • EXTRA _OW • Press POWER. FLUFF • Turn the knob to desired Sensor Dry Cycle. • Select DRYNESS to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level. The default dryness setting is Normal when a Sensor Dry Cycle is selected. You can select a different dryness level, depending on your load, by pressing [Dryness and choosing More, Less or Damp. Selecting More, [.ess or Damp automatically adjusts the sensed time needed. Once a dryness level is set, it cannot be changed without stopping the cycle. • Select the desired Options. To make changes during a Sensor Dry Cycle: TEMP AbUST _1_ C¥C S NOTE: The |emp feature can be used only with Timed Cycles and the Custom Refresh cycle. NOTE: During a Timed Cycle, you can change the settings for Time, Temp, the Wrinkle Prevent setting and the End of Cycle Signal. 5. (OPTIONAL STEP) If desired, select OPTIONS. For more details, see "Options." 6. iOPTIONAI. STEP) If desired, press END OF CYCI.E SIGNAl.. A signal will sound to alert you when a cycle ends. For more details, see "End of Cycle Signal." 7. Press START. Be sure the door is closed. • Press PAUSE/CANCEl_ • Adjust Dryness. • MORE • NORMAL • L_SS • If you do not press Start within 5 minutes of selecting the cycle, the dryer automatically shuts off. • If you wish to end your drying cycle after pressing Start, press PAUSE/CANCEl. twice. To use a Steam Cycle • Press POWER. NOTE: [Dryness selections can be made only while using Sensor Dry Cycles. How the Sensi-Care TM Drying System Works Moisture-sensing strips and ternperature sensors inside the dryer drum monitor how fast the load is drying, how hot the air should be and when clothes are dry. The system automatically stops the cycle to help save time and avoid overdrying. To use a Timed Cycle • Turn knob to desired Timed Cycle. • Press the TIMED CYCI.E ADJUST up or down arrows until the desired drying time is displayed. Press the up or down arrows and the time will change by 1-minute intervals. Press and hold the up or down arrows and the time will change by 5-minute intervals. Turn the knob to desired Steam Cycle. Press the TIMED CYCI.E ADJUST up or down arrows until the desired drying time is displayed. Press the up or down arrows and the time will change by 1-minute intervals. Press and hold the up or down arrows and the time will change by 5-minute intervals. NOTE: The Timed Cycle Adjust features can be used only with Timed Cycles and the Custom Refresh cycle. TIMED CYCLE ADJUST NOTE: The Timed Cycle Adjust features can be used only with Timed Cycles and the Custom Refresh cycle. TIMED CYCLE ADJUST :22