Maytag MEDE300VW User Guide - Page 21
a Sensor Cycle - manual
UPC - 883049135632
View all Maytag MEDE300VW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3000 SERIES MCT M]y=g Corqrqerc_ led/_0kg¥ power,_ancel start * paus © © opt_o.s tinge adjust sensing estimated time _Em_d w_t a_mp _t _,y wrinkle II h_gh rr*gular U _,_ry III lessdry Explosion Hazard Keep fiammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything fiammable on it (even after washing). Failure to follow these instructions explosion, or fire. can result in death, WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. This manual covers several different models. Your dryer may not have all of the cycles and features described. The following is a guide to starting your dryer. Please refer to specific sections of this manual for more detailed information. 1. Clean lint screen before each load. See "Cleaning the I.int Screen." 2. Place laundry in dryer and shut door. 3. Press the POWER/CANCEl. button then rotate the dial to select either a Sensor or Timed Cycle. The preset settings and drying time for the cycle chosen will be displayed. NOTE: A default time is displayed when a Sensor Cycle is selected. During the first few minutes of the drying process, the cycle time may automatically vary from the default ]ii[ =.. Fire Hazard No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Items containing on a clothesline foam, rubber, or plastic must be dried or by using an Air Cycle. Failure to follow these instructions or fire. can result in death time based on the size and fabric type of the load. Toward the end of the drying process, the estimated time display will adjust again, showing the final drying time. To use a Sensor Cycle NOTE: A light next to each feature will glow yellow when the feature is selected. The light will not glow when the selection is unavailable with the cycle or option combinations selected. • Press the POWER/CANCEl. button. • Rotate the dial to select a Sensor Cycle.