Maytag MER6875BAS Use and Care Guide - Page 21

During, After

Page 21 highlights

Cleantn 4. Press the Autoset pad. • "LITE" (Light soil level} is displayed. 5. Press the Autoset pad to scroll through the self-cleaning settings. "HVy" (Heavy Soil, 4 hours} "MEd" (Medium Soil, 3 hours} "LITE" (Light Soil, 2 hours} Choosing the soil level of the oven automatically programs the self-cleaning time. 6. After four seconds, CLEAN, DELAY and UPPERor LOWER will light and LOCK will flash in the display. When the oven door latches, LOCK will stop flashing and light continuously to show that the oven is set for a delayed clean operation. The delay time will display. After Self=Cleaning About one hour after the end of the self-clean cycle, LOCK will turn off. The doors can then be opened. Some soil may leave a light gray, powdery ash. Remove it with a damp cloth. If soil remains after wiping, that means the clean cycle was not long enough. The soil will be removed during the next clean cycle. If oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them easier to move. Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance. A white discoloration may appear after cleaning if acidic or sugary foods were not wiped up before the self=clean cycle. This discoloration is normal and will not affect performance. During the Self-Clean Cycle When LOCK shows in the display, both oven doors are locked. To prevent damage to the doors, do not force the doors open when LOCK is displayed. Smoke and Smells You may see some smoke and smell an odor the first few times the oven is cleaned. This is normal and will lessen in time. Smoke may also occur if the oven is heavily soiled or if a broiler pan was left in the oven. Sounds As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven. Notes: ° If an oven door is left open, "door" will appear in the display and a signal will beep until the door is closed and the Clean pad is pressed again. ° If more than 30 seconds elapse between pressing the Clean pad and the Autoset pad, the program will automatically return to the previous display. • The oven doors will be damaged if the oven doors are forced to open when LOCK is still displayed. 2O

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Cleantn
4.
Press the Autoset
pad.
"LITE" (Light soil level}
is
displayed.
5.
Press the Autoset
pad to scroll through the
self-cleaning settings.
"HVy" (Heavy Soil, 4 hours}
"MEd" (Medium Soil, 3 hours}
"LITE" (Light Soil, 2 hours}
Choosing the soil level of the oven automatically programs
the self-cleaning time.
6. After four seconds, CLEAN, DELAY and UPPERor LOWER
will light and LOCK will flash in the display. When the
oven door latches, LOCK will stop flashing and light
continuously to show that the oven is set for a delayed
clean operation.
The delay time will display.
During
the
Self-Clean
Cycle
When LOCK shows in the display, both oven doors are locked.
To prevent damage to the doors,
do
not force the doors open
when LOCK is displayed.
Smoke
and
Smells
You may see some smoke and smell an odor the first few
times the oven is cleaned. This is normal and will lessen in
time.
Smoke may also occur if the oven is heavily soiled or if a
broiler pan was left in the oven.
Sounds
As the oven heats, you may hear sounds of metal parts
expanding and contracting.
This
is
normal and will not
damage the oven.
After
Self=Cleaning
About one hour after the end of the self-clean cycle,
LOCK
will turn off. The doors can then be opened.
Some
soil may
leave
a
light gray,
powdery
ash.
Remove
it
with a damp cloth.
If soil remains after wiping, that means
the clean cycle was not long enough.
The soil will be
removed during the next clean cycle.
If
oven
racks were
left
in
the
oven
and do not
slide
smoothly
after a
clean cycle,
wipe racks and rack supports
with a small amount of vegetable oil to make them easier to
move.
Fine lines
may appear
in
the
porcelain
because
it
went
through
heating
and
cooling.
This
is
normal and will not
affect performance.
A white
discoloration may
appear
after
cleaning if
acidic
or sugary
foods were
not wiped
up
before the
self=clean
cycle.
This discoloration is normal and will not affect
performance.
Notes:
°
If an oven door
is
left open, "door" will appear
in
the
display and a signal will beep until the door is closed
and the Clean pad is pressed again.
°
If more than 30 seconds elapse between pressing the
Clean pad and the Autoset pad, the program will
automatically return to the previous display.
The oven doors will be damaged if the oven doors are
forced to open when LOCK is still displayed.
2O