Meade TE923W-M User Manual - Page 6

Before you begin - installation manual

Get Meade TE923W-M PDF manuals and user guides View all Meade TE923W-M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Before you begin • We recommend using alkaline batteries for the remote weather sensors and the main unit when temperatures are above 32°F (0°C). We recommend using lithium batteries for the remote weather sensors when temperatures are below 32°F (0°C). • Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements). • ALWAYS install batteries in the remote weather sensors before the main unit. • Insert batteries matching the polarity in the battery compartment • Remove and discard any factory applied protective plastic film affixed to the LCD display (if any). • During an initial setup, place the main unit close to the remote weather sensors. • After reception is established (all of the remote readings will appear on the main unit's display), position the remote sensors and the main unit within the effective transmission range of up to 328 feet (100 meters). Ideally they should be placed within the line of sight of the main unit. See placement tips in the user manual for each remote weather sensor separately. • Transmission range may be affected by trees, metal structures and electronic appliances. • The main unit must be placed indoors. • The effective operating range may be influenced by the surrounding building materials and how the receiver (main unit) and transmitters (weather sensors) are positioned. • Place the remote weather sensors so that they face the main unit (receiver), minimizing obstructions such as doors, walls, and furniture. Note: When the temperature falls below freezing, the batteries in the outdoor remote weather sensors may have reduced voltage supply and a shorter effective range. We recommend using lithium batteries at temperatures of 32°F (0°C) and below. IMPORTANT: Make sure that the remote weather sensors are easily accessible for cleaning and maintenance. We recommend cleaning the remote weather sensors periodically, as the dirt and debris may affect sensors accuracy. 6 TE923W IM1(ENG) HONEYWELL R.pmd 6 4/11/08, 5:24 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
6
Before you begin
•
We recommend using alkaline batteries for the remote weather sensors and the main unit
when temperatures are above 32
°
F (0
°
C). We recommend using lithium batteries for the
remote weather sensors when temperatures are below 32
°
F (0
°
C).
•
Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct
power requirements).
•
ALWAYS
install batteries in the
remote
weather sensors
before
the main unit.
•
Insert batteries matching the polarity in the battery compartment
•
Remove and discard any factory applied protective plastic film affixed to the LCD display (if any).
•
During an initial setup, place the main unit close to the remote weather sensors.
•
After reception is established (all of the remote readings will appear on the main unit’s
display), position the remote sensors and the main unit within the effective transmission
range of up to 328 feet (100 meters).
Ideally they should be placed within the line of sight
of the main unit. See placement tips in the user manual for each remote weather
sensor separately.
•
Transmission range may be affected by trees, metal structures and electronic appliances.
•
The main unit must be placed indoors.
•
The effective operating range may be influenced by the surrounding building materials and
how the receiver (main unit) and transmitters (weather sensors) are positioned.
•
Place the remote weather sensors so that they face the main unit (receiver), minimizing
obstructions such as doors, walls, and furniture.
Note: When the temperature falls below freezing, the batteries in the outdoor remote
weather sensors may have reduced voltage supply and a shorter effective range. We
recommend using lithium batteries at temperatures of 32
°
F (0
°
C) and below.
IMPOR
T
ANT
: Make sure that the remote weather sensors are easily accessible for cleaning
and maintenance.
We recommend cleaning the remote weather sensors periodically, as the dirt and debris may
affect sensors accuracy.
M
P
4
2
:
5
,
8
0
/
1
1
/
4
d
m
p
.
R
L
L
E
W
Y
E
N
O
H
)
G
N
E
(
1
M
I
W
3
2
9
E
T
6