Memorex MVDP1083 User Manual - Page 30

DVD OPERATION IMPORTANT NOTES: • After plugging in, the unit will be in the Power Off mode. Press the Power button on the main unit to turn on the unit; the ENTER button will light briefly. You can also press the STANDBY button on the remote to turn on the unit. • " " will appear on the screen during operation if you try to access a function that is not available on the disc. • Some discs may take a few seconds to load. • If a disc is inserted incorrectly, dirty, damaged, or is not present at all, "NO DISC" will appear in the display. • Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side facing up, align it with the guides and place it in its proper position. • It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD player that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they are not explained in this owner's manual. • If the unit is in the Stop mode or if there is no disc in the disc tray, the unit will power off automatically after seven minutes. PLAYBACK OF A DVD 1 2 Press the STANDBY button on the remote to turn on the unit. NOTE: You can also press the POWER button on the main unit to turn on the unit. 2 1 Press the OPEN/CLOSE button to open the disc tray, "OPEN" will appear on the screen. Insert a disc with the label side facing up on the disc tray. 2 CONTINUED ON THE NEXT PAGE 29