Miele G 4998 Vi AM Operating instructions/Installation instructions - Page 20
Rinse aid indicator, Setting the rinse aid dosage, simultaneously
![]() |
View all Miele G 4998 Vi AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Before using for the first time Rinse aid indicator When the Rinse aid indicator lights up, the rinse aid reservoir contains sufficient rinse aid for 2 - 3 programs only. Add rinse aid. If you consistently use a "Tab" detergent, you can deactivate the refill indicators if you wish (see "Options - Refill indicators"). Setting the rinse aid dosage You can adjust the rinse aid dosage for best results. The rinse aid dosage is set in stages from 0 to 6. It is set to 3 at the factory. This is the recommended setting. The rinse aid dosage can turn out to be higher than the set value due to the automatic adjustment of the program. If spots appear on dishware and glassware: Increase the rinse aid dosage. If clouding or smearing appears on dishware and glassware: Decrease the rinse aid dosage. Turn the dishwasher off with the button, if it is turned on. Press the program selection button , and, simultaneously switch the dishwasher on using the button. Keep the program selection button pressed in for at least four seconds until the lower right program indicator light comes on. If this does not happen, start the procedure from the beginning again. Press the button three times. The indicator light will flash 3 times at short intervals. The set value will appear in the display after . The flashing sequence will appear in the display. This indicates a factory default setting of 3. Use the program selection button to select the setting required. Each press of the button moves you up a stage. The setting is now saved. Turn the dishwasher off with the button. 20
![](/manual_guide/products/miele-g-4998-vi-operating-instructionsinstallation-instructions-8764a8d/20.png)