Miele G 4998 Vi AM Operating instructions/Installation instructions - Page 43
Buzzer tones, dure from the beginning again.
View all Miele G 4998 Vi AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Options Buzzer tones A sequence of audible tones will sound at the end of the program or if there is a fault. The buzzer at the end of a program and the warning buzzer in the event of a fault will sound 4 times at intervals with a short pause between each set. The buzzer tones are activated at the factory. You can deactivate the buzzer that sounds at the end of a program if you wish. The warning buzzer for faults cannot be deactivated. Open the door. Turn the dishwasher off with the button, if it is turned on. Press the program selection button , and, simultaneously switch the dishwasher on using the button. Keep the program selection button pressed in for at least four seconds until the lower right program indicator light comes on. If this does not happen, start the procedure from the beginning again. Press the button 4 times. The indicator light will flash 4 times at short intervals. The flashing sequence in the time display shows whether the buzzers at the end of the program are activated or deactivated Buzzer tones activated - : Buzzer tones deactivated Press the program selection button to change the setting. The setting is now stored in memory. Turn the dishwasher off with the button. 43