Miele G 4998 Vi AM Operating instructions/Installation instructions - Page 35
Starting a program, Time display, ter temperature at each intake, the re
View all Miele G 4998 Vi AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Operation Starting a program Start the program by closing the door within four seconds of the last press of a button. The program will begin. If you do not close the door within four seconds, the indicator lights of the selected program and the time display will flash. The program cannot be started until you press the program selection button and close the door within four seconds. A program should only be canceled in the first few minutes, if at all. Otherwise important program stages could be omitted. Time display The duration of the program selected appears in hours and minutes in the display before the program begins. During the program, the time left until the end of the program can only be viewed when the door is open. The program duration displayed may vary with the same program. It is influenced by, among other things, the water temperature at each intake, the reactivation process, the softener assembly, the type of detergent, the amount of dishes, and the amount of soiling. When a program is selected for the first time, the display will show the average program duration for a cold water intake. The times shown in the program overview refer to standard test loads and temperatures. Each time a program is run, the electronic module calculates the program duration required depending on the temperature of the water taken into the dishwasher and the amount of dishes. 35