Miele G 4998 Vi AM Operating instructions/Installation instructions - Page 44
Optimize Standby activated
View all Miele G 4998 Vi AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Options Optimize Standby "Optimize Standby" is activated by default. To save energy, the dishwasher will switch off automatically a few minutes after the last time a button has been pressed or after the end of a program. The dishwasher will not turn off while a program is running, during the delay start period, or if there is a fault. Optimize Standby can be switched off if you prefer. If you do this the duration before the dishwasher switches off automatically increases to 6 hours. Doing this will increase energy consumption. Open the door. Turn the dishwasher off with the button, if it is turned on. Press the program selection button , and, simultaneously switch the dishwasher on using the button. Keep the program selection button pressed in for at least four seconds until the lower right program indicator light comes on. If this does not happen, start the procedure from the beginning again. Press the button 8 times. The indicator light will flash 8 times at short intervals. The flashing sequence in the display shows whether or not Optimize Standby is activated Optimize Standby" activated Optimize Standby" deactivated Press the program selection button to change the setting. The setting is now stored in memory. Turn the dishwasher off with the button. 44