Miele G 4998 Vi AM Operating instructions/Installation instructions - Page 62
Frequently asked questions, Cleaning the drain pump and, non-return valve
View all Miele G 4998 Vi AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Frequently asked questions Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a program, the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Disconnect the dishwasher from the electrical supply. Turn off the dishwasher and withdraw the plug. Take the filter system out of the wash cabinet (see "Cleaning and care, Cleaning the filters"). Scoop the water out of the wash cabinet using a suitable container or utensil. The drain pump is located underneath the non-return valve (see arrow). Remove all foreign objects from the drain pump (glass or bone splinters). Before returning the non-return valve, check that the drain pump is not blocked. Spin the impeller several times in both directions to check for obstructions. Carefully reinsert the non-return valve and secure it with the locking clamp. Make sure the locking clamp clicks into place! Press the catch for the non-return valve inwards . Tilt the non-return valve inwards until it is released . Rinse it thoroughly under running water and remove any dirt from the nonreturn valve. Be careful not to damage any delicate components when cleaning the drain pump and the non-return valve. 62