Miele G 4998 Vi AM Operating instructions/Installation instructions - Page 9
socket adapter or an extension lead. These do not guarantee the re
View all Miele G 4998 Vi AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
IMPORTANT SAFETY INSTRUCTIONS To avoid the risk of damage to the dishwasher, make sure that the connection data on the data plate (fuse rating, voltage, and frequency) matches the electrical supply before connecting the dishwasher to the mains. Consult a qualified electrician if in any doubt. Do not connect the dishwasher to the electrical supply until it has been fully installed and any adjustment has been made to the door springs. The dishwasher may only be operated if the door opening mechanism is working correctly. Otherwise there could be a risk of danger while the automatic door opening mechanism (depending on model) is active. To check that the door opening mechanism is working correctly: - The door springs must be adjusted equally on both sides. They are correctly adjusted when the door remains stationary when left half open (approx. 45° opening angle). It is also important that the door cannot fall open. - The door locking pins automatically retract when the door opens at the end of the drying phase. Do not connect the appliance to the electrical supply by a multisocket adapter or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating). This appliance must not be installed and operated in a non-stationary location (e.g., on a ship). Do not install the dishwasher in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic module may be impaired at temperatures below freezing point. To avoid any damage to the appliance, the dishwasher must only be operated when it is connected to a fully vented plumbing system. The water pressure (flow pressure at the connection point) must be between 7.25 - 145 psi. 9