Motorola L514BT User Guide - Page 49

4.26.8 Deleting all old messages 1. Press MENU and then VOL+ or REDIAL/VOL- to select ANSWER MACHINE. 2. Press MENU and then VOL+ or REDIAL/VOL- select DEL ALL OLD MSG. 3. Press MENU to confirm. NOTE When the answering machine is full, will flash if there are new messages. ERASE SOME ANSWERER MSG will toggle within 2 seconds with MEMORY FULL in idle to alert user to delete some answering machine messages to free up the memory. 4.26.9 Remote access Remote access allows you to operate your answering machine and listen to your messages by calling your phone from another phone. Turn the remote access on/off 1. Press MENU and then VOL+ or REDIAL/VOL- to select ANSWER MACHINE. 2. Press MENU and then VOL+ or REDIAL/VOL- to select REMOTE ACCESS. 3. Press MENU and then VOL+ or REDIAL/VOL- to select ON or OFF. 4. Press MENU to confirm. Using the phone To enter the remote access mode, dial your phone number from another phone, when you hear the announcement, press TONE/* and then enter the 4-digit remote security code (default code is 0000) on your another telephone. The correct sequence of the 4 security PIN digits needs to be detected before entering remote access mode. Random digits detected prior to the correct 4 digits sequence are ignored, and answering machine recording continues until the complete PIN is detected. There is no system prompt to enter the remote access code. Press the following keys on your another phone to perform the following functions, after entering your remote access mode. Press... To... 1 Press once to replay the current message from the beginning. Press twice to play the previous message. 2 Play/Stop the message 3 Skip forward to the next message 4 Toggle Answer Off/Announce Only/ Announce and Record modes 7 Listen to the Main Menu (for Full Voice prompts only) 0 Delete the message 49