Motorola RDU2020 User Guide

Motorola RDU2020 - RDX UHF - Radio Manual

Motorola RDU2020 manual content summary:

  • Motorola RDU2020 | User Guide - Page 1
  • Motorola RDU2020 | User Guide - Page 2
    Motorola, the Stylized M Logo, and all other trademarks indicated as such herein are Trademarks of Motorola, Inc. Reg. U.S. Pat. & Tm. Off. © 2007 Motorola, Inc. All rights reserved.
  • Motorola RDU2020 | User Guide - Page 3
    Overview 11 Parts of the Radio 11 On/Off/Volume Knob 12 Channel Selector Knob 12 Accessory Connector 12 Model Label 12 Microphone 12 Antenna 12 LED Indicator 12 Side Buttons 12 The Lithium-Ion (Li-Ion) Battery 12 Battery Features 14 About the Li-Ion Battery 14 Battery Recycling and
  • Motorola RDU2020 | User Guide - Page 4
    30 Talk Range 30 Radio LED Indicators 32 Hands-Free Use/VOX 33 With Compatible VOX Accessories. . . . .33 Setting VOX Sensitivity 34 Microphone Gain 34 Battery Save 34 Reset to Factory Defaults 34 End of Transmission Tone (Roger Beep Tone 35 Programming Features 36 Programming Mode 36
  • Motorola RDU2020 | User Guide - Page 5
    a Multi Unit Charger (MUC 51 Cloning Radio using the Radio to Radio (R2R) Cloning Cable (Optional Accessory 53 Cloning using the CPS (Computer Programming Software 55 Troubleshooting 56 Use and Care 60 Frequency and Code Charts 61 RDX VHF Frequencies Chart 61 RDV2020 - VHF Default Frequencies
  • Motorola RDU2020 | User Guide - Page 6
    your radio. ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following website which lists approved accessories: http://www.motorola.com/RDX SAFETY
  • Motorola RDU2020 | User Guide - Page 7
    before use Business Radios, RPSD 1C15, Motorola 8000 West Sunrise Boulevard Plantation, Florida 33322 PACKAGE CONTENTS • Radio • Antenna (only for RDU4100 and RDV5100) • Spring Action Belt-Clip • Lithium-Ion Battery • Power Supply • User Guide • Warranty Card • Drop-in Tray Charger • Product Safety
  • Motorola RDU2020 | User Guide - Page 8
    of this user guide or for product-related questions, contact: 1-800-448-6686 in the USA 1-800-461-4575 in Canada 1-866-522-5210 on your TTY (Text Telephone) For product information visit us at: www.motorola.com/radios/business or visit our microsite at: www.motorola.com/RDX INTRODUCTION English
  • Motorola RDU2020 | User Guide - Page 9
    the instructions and cautionary markings on • the charger, • the battery, and • the radio using the battery 1. To reduce risk of injury, charge only the rechargeable Motorola-authorized batteries. Other batteries may explode, causing personal injury and damage. 2. Use of accessories not recommended
  • Motorola RDU2020 | User Guide - Page 10
    SAFETY INFORMATION OPERATIONAL SAFETY GUIDELINES • Turn the radio OFF when charging battery. • The charger is not suitable for outdoor use. Use only in dry locations/conditions. • Connect charger only to an appropriately fused and wired supply of the correct voltage (as specified on the product
  • Motorola RDU2020 | User Guide - Page 11
    INFORMATION INTERFERENCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. RDX Series™ Business two-way radios operate on radio frequencies that are regulated by the Federal Communications
  • Motorola RDU2020 | User Guide - Page 12
    and Code Charts". For questions on determining the radio frequency, call Motorola Product Services at: 1-800-448-6686 Changes or modifications not expressly approved by Motorola may void the user's authority granted by the FCC to operate this radio and should not be made. To comply with FCC
  • Motorola RDU2020 | User Guide - Page 13
    RADIO OVERVIEW PARTS OF THE RADIO Antenna Microphone Channel Selector Knob On/Off/Volume Knob LED Indicator Accessory Connector Model Label Lithium-Ion Battery PTT Button SB1-Monitor Button SB2- Scan/ Nuisance Channel Delete 11 English RADIO OVERVIEW
  • Motorola RDU2020 | User Guide - Page 14
    Used to switch the radio to different channels. Accessory Connector Used to connect compatible audio accessories. Model Label Indicates the model of the radio. Microphone Speaks clearly into the microphone when sending a message. Antenna For models RDU2020, and RDV2020 the antennas are non-removable
  • Motorola RDU2020 | User Guide - Page 15
    This User Guide covers multiple RDX Series™ models, and may detail some features your radio does not have. The radio's model is shown on the front of the radio, underneath the speaker, and provides you the following information: Model RDV2020 RDU2020 RDU4100 RDV5100 Frequency Band VHF UHF UHF VHF
  • Motorola RDU2020 | User Guide - Page 16
    to 50% per day. Further, a battery RADIO OVERVIEW English 14 which receives minimal overcharging and averages only 25% discharge, lasts even longer. Motorola batteries are designed specifically to be used with a Motorola charger and vice versa. Charging in non-Motorola equipment may lead to
  • Motorola RDU2020 | User Guide - Page 17
    encourages the recycling of Li-Ion batteries. In the U.S. and Canada, Motorola participates in the nationwide Rechargeable Battery Recycling Corporation (RBRC) program for Li-Ion battery collection and recycling. Many retailers and dealers participate in this program. For the location of the drop
  • Motorola RDU2020 | User Guide - Page 18
    -Ion (Li-Ion) Battery Battery Latch slots RADIO OVERVIEW 1. Turn OFF the radio. 2. With the Motorola logo side up on the battery pack, fit the tabs at the bottom of the battery into the slots at the bottom of the radio's body. 3. Press the top part of the battery towards the radio until a click
  • Motorola RDU2020 | User Guide - Page 19
    Alkaline Battery Pack (Optional Accessory) Installing Alkaline Batteries Removing Alkaline Batteries RADIO OVERVIEW Alkaline Battery Door Alkaline Battery Door 1. Turn OFF the radio, if it is turned ON. 2. Remove Li-Ion battery. 3. Assemble alkaline battery pack in the same steps as installing
  • Motorola RDU2020 | User Guide - Page 20
    and Removing Antenna These instructions apply ONLY to models RDU4100 and RDV5100. Do not attempt to remove the antenna if your radio is not one of these models. Attaching the Antenna Removing the Antenna RADIO OVERVIEW 1. Align the threaded end of the antenna with the radio's antenna connector
  • Motorola RDU2020 | User Guide - Page 21
    clip rails into the belt clip grooves on the back of the battery pack and slide it down until the belt clip tab snaps into place. 2. To remove, pull back the metal release tab on the belt clip tab and push the spring action belt clip upward to remove. Power Supply Drop-in Tray Charger The radio
  • Motorola RDU2020 | User Guide - Page 22
    feature ON Battery Type 5 Watts 4 Watts 2 Watts Standard 8.5 hours 8.5 hours 12 hours High 17 hours 17 hours 24 hours Ultra High 18.5 hours 18.5 hours 26 hours Note: Battery life is estimated based on 5% transmit/ 5% receive/ 90% standby standard duty cycle RADIO OVERVIEW English
  • Motorola RDU2020 | User Guide - Page 23
    the Alkaline battery life: Alkaline Battery Life Battery Save Feature 5 Watts 4 Watts 2 Watts ON 26 hours* 26 hours* 26 hours Notes: • Battery life are being estimated based on 5% transmit/ 5% receive/ 90% standby standard duty cycle. • * When using Alkaline battery, the radio is set
  • Motorola RDU2020 | User Guide - Page 24
    Battery RDX Series™ offers two types of chargers : • Standard Charger and, • Rapid Charger. Note: The radio comes equipped with a Standard Charger To charge the battery (with the radio attached), place it in a Motorola-approved Drop-in Tray Single Unit Charger or Drop-in Tray Multi Unit Charger
  • Motorola RDU2020 | User Guide - Page 25
    default position will charge a standard battery. The following image shows the orientation for each battery: Adjustable bracket Adjustable bracket Standard High and Ultra High Capacity Figure 1: Identifying the Drop-In Charger's Position Before Charging the Battery RADIO OVERVIEW 23 English
  • Motorola RDU2020 | User Guide - Page 26
    capacity or Ultra High capacity battery: RADIO OVERVIEW 1. Squeeze both tabs on each side of the removable bracket in the drop-in charger tray and lift the bracket from the charger tray. 2. Rotate the removable bracket 180 degrees and replace it by fitting it in the charger slot until it snaps
  • Motorola RDU2020 | User Guide - Page 27
    charger has powered up The charger is currently charging Battery is fully charged Battery had a fault when battery was inserted Notes: • (*) Normally re-seating the battery pack will correct this issue. • (**) Battery temperature is too warm or too cold or wrong power supply is being used RADIO
  • Motorola RDU2020 | User Guide - Page 28
    Waiting to Charge (**) Double-blink yellow indications Battery charging conditions not suitable Notes: • (*) Normally re-seating the battery pack will correct this issue. • (**) Battery temperature is too warm or too cold or wrong power supply is being used RADIO OVERVIEW English 26
  • Motorola RDU2020 | User Guide - Page 29
    The following table provides the estimated charging time of the battery. For further details, see "Battery" on page 80. Charging Solution Standard Charging Solution Rapid Charging Solution Estimated Charging Time Battery Type Standard High Capacity 7 hours 12 hours 1.5 hours 3 hours Ultra
  • Motorola RDU2020 | User Guide - Page 30
    : • This Multi Unit Charger also allows you to clone up to 3 radios (3 Source radios and 3 Target radios). Refer to page 51 for details. • Further details on MUC's operation are explained in the Instructions Sheet provided with the MUC. For part number details, refer to the Accessories section. MUC
  • Motorola RDU2020 | User Guide - Page 31
    not hold the radio too close to the ear when the volume is high or when adjusting the volume SELECTING A CHANNEL To select a channel, rotate the Channel Selector Knob and select the desired channel number. Program each channel separately. Each channel has its own Frequency, Interference Eliminator
  • Motorola RDU2020 | User Guide - Page 32
    LED Indicator blinks red while the radio is receiving a call. 4. To respond, hold the radio vertically 1 to 2 inches (2.5 to 5cm) from mouth. Press the PTT button to talk; release it to listen. TALK RANGE TALK RANGE Industrial Multi-Level Model Inside steel/concrete Inside multi-level Industrial
  • Motorola RDU2020 | User Guide - Page 33
    two-way communication, the channel, frequency, and interference eliminator codes must be the same on both radios. This depends on the stored profile that has been preprogrammed on the radio: 1. Channel: Current channel that the radio is using, depending on radio model. 2. Frequency: The frequency
  • Motorola RDU2020 | User Guide - Page 34
    Edit Channel Busy Cloning Mode Red heartbeat Solid orange Two orange heartbeats Cloning In Progress Fatal Error at Power up Low Battery Solid orange One green blink, one orange blink, one green blink, then repeat for 4 seconds Orange blink Low Battery Shutdown Monitor Power-Up 'Idle' Programming
  • Motorola RDU2020 | User Guide - Page 35
    GETTING STARTED HANDS-FREE USE/VOX Accessory Port/ Connector VOX Accessory Motorola RDX Series™ radios can operate hands-free (VOX) when used with compatible VOX accessories. With Compatible VOX Accessories The default factory setting for VOX sensitivity level is OFF (level '0'). Before using
  • Motorola RDU2020 | User Guide - Page 36
    CPS. Microphone default setting is set to level 2 (medium gain). Battery Save Battery Save feature extends battery life as your radio goes into 'Idle' state. To enable/ disable press SB1 and SB2 buttons simultaneously for 2 or 3 seconds while powering up the radio until you hear a quick series of
  • Motorola RDU2020 | User Guide - Page 37
    GETTING STARTED End of Transmission Tone (Roger Beep Tone) To enable/disable End of Transmission Tone, short press the SB1 button while turning ON the radio . Note: This setting is set to OFF by default 35 English
  • Motorola RDU2020 | User Guide - Page 38
    . CPS software download is available for free at www.motorola.com/RDX PROGRAMMING MODE Programming Mode is a special radio mode to program basic radio's features by using the radio's panel. When the radio is set to Programming Mode, you are able to read and modify three features: • Frequencies
  • Motorola RDU2020 | User Guide - Page 39
    Programming Mode (PTT + SB1 + Turn ON radio) PROGRAMMING MODE 1 2 Frequencies CTCSS/DPL First PTT Second PTT Digit Digit First Digit PTT PTT Second Digit Third Digit PTT Long PTT Idle Programming Mode Long PTT PTT "Roll Over" key chirp 3 Auto- Scan PTT ON / OFF Exit Long PTT
  • Motorola RDU2020 | User Guide - Page 40
    9 Programming Mode: Reading the Values Confirmation Beep LED Indication Zero beep One beep Two beeps Three beeps Four beeps Long beep Long beep and one beep Long beep and two beeps Long beep and three beeps Long beep and four beeps One orange blink One short red blink Two short red blinks Three
  • Motorola RDU2020 | User Guide - Page 41
    values you need to read two digits as RDX Series™ radios have 27 frequencies for VHF and 89 frequencies for UHF. Once in 'Idle' Programming Mode, the radio will signal the first value it was programmed when you short press the PTT button (see Figure 2: Reading Frequencies Values on page 40). This
  • Motorola RDU2020 | User Guide - Page 42
    you short press the PTT button again, the radio will signal you the second digit value. PROGRAMMING M 1 2 Frequencies CTCSS First PTT Second PTT Digit Digit First Digit You will have to read three digits as RDX Series™ have up to 122 codes available (refer to "Frequencies and Codes Charts
  • Motorola RDU2020 | User Guide - Page 43
    Auto-Scan Mode, if you short press PTT button, the radio will return to the 'Idle' Programming Mode. It will then generate a 'roll-over' chirp and it will start blinking a green heartbeat Programming Frequencies, Codes and Auto-Scan Each time your radio signals and beeps the current setting you can
  • Motorola RDU2020 | User Guide - Page 44
    you can: • Long press the PTT button. The radio will return to the 'Idle' Programming Mode or, • Turn OFF the radio and enter Programming Mode again (see instructions in the beginning of this section) 2. I am trying to program a frequency (or code) value but the radio would not do it. It rolled
  • Motorola RDU2020 | User Guide - Page 45
    the PTT button twice. • If you are already in the 'Idle' Programming Mode, long press the PTT button once. 6. I am done programming the features in this channel and want to program another channel. Switch to the new channel you wish to program by using the Channel Selector Knob. The radio will
  • Motorola RDU2020 | User Guide - Page 46
    digit to '1'. • Short press the PTT button once to move ahead and program the frequency's second digit. Radio will signal current value which is '2' (two red blinks). • Press the SB1 button to increase the digit value to '3'. • Long press the PTT button. LED Indicator will show a green heartbeat
  • Motorola RDU2020 | User Guide - Page 47
    ON or OFF on a particular channel. To set Auto-Scan to ON: • Enter Programming Mode and select the desired channel (see Figure 1: Entering Programming Mode on page 37). • Short press the PTT button six times to enter Auto-Scan Programming Selection Mode. The radio will signal beeps and will show
  • Motorola RDU2020 | User Guide - Page 48
    Codes (CTCSS/DPL), set the code settings for the channels to '0' in the CTCSS/DPL Programming Selection Mode. Whenever the radio is set up in Scan, the LED Indicator will signal a red blink. Note: (*)Assumes the SB2 button is not programmed to other function different from the default. If Auto
  • Motorola RDU2020 | User Guide - Page 49
    button (*) • Wait until the radio stops on the channel you wish to eliminate, then long press the SB2 button to delete it. • The channel will not be removed until you exit Scan by short pressing the SB2 button again or by turning the radio OFF. Note: (*) Assumes the SB2 button is not programmed
  • Motorola RDU2020 | User Guide - Page 50
    CPS Programming Cable(*). CPS Software is available for free as web based downloadable software at: www.motorola.com/RDX To program, connect the RDX Series™ radio via the Drop-in Charger Tray and CPS Programming Cable as shown in the picture above. CPS allows the user to program frequencies, PL
  • Motorola RDU2020 | User Guide - Page 51
    the PTT button, transmissions can be terminated by setting up a 'time-out' timer. Power Select Power Select allows you to select between high and low transmission power per frequency in each channel. The power levels for RDX Series™ 2W toggle between 1W and 2W or 2W and 4W/5W depends on the model
  • Motorola RDU2020 | User Guide - Page 52
    CPS has. CPS offers more capabilities. For more information refer to the HELP file in the CPS. • Some of the features available with the CPS software may vary depending on the radio model. PROGRAMMING FEATURES English 50
  • Motorola RDU2020 | User Guide - Page 53
    can clone RDX Series™ radio profiles from one Source radio to a Target radio by using any one of these 3 methods: • a Multi Unit Charger (optional accessory), • Two Single Unit Chargers (SUC) and a Radio-to- Radio cloning cable (optional accessory), • the CPS (free software download) Cloning with
  • Motorola RDU2020 | User Guide - Page 54
    the Instructions Sheet provided with the MUC. When ordering the MUC, please refer to P/N RLN6309. Notes: • Paired Target radios and Source radios must be of the same band type in order for the cloning to run successfully. • (*) MUC pockets numbers should be read from left to right with the Motorola
  • Motorola RDU2020 | User Guide - Page 55
    Radio to Radio (R2R) Cloning Cable (Optional Accessory) Operating Instructions 1. Before beginning the cloning process, make sure you have: • A fully charged battery on each one of the radios. • Two Single Unit Chargers (SUC). • Turned OFF the radios and, • Both radios are of the same radio model
  • Motorola RDU2020 | User Guide - Page 56
    7. Ensure that radios are both from the same type (same frequency band, same front panel (display/non display), same region and same transmission power). Note: This cloning cable is designed to operate only with compatible Motorola RLN6175 (Standard) and RLN6304 (Rapid) Single Unit Chargers. When
  • Motorola RDU2020 | User Guide - Page 57
    Charger and the CPS Programming Cable. To order the CPS Programming Cable, please refer to P/N RKN4155. Information on how to clone using the CPS is available either in: • the CPS Help File --> Content and Index --> Cloning Radios, or • in the CPS Programming Cable Accessory Leaflet. PROGRAMMING
  • Motorola RDU2020 | User Guide - Page 58
    TROUBLESHOOTING Symptom No Power Hearing other noises or conversation on a channel Message Scrambled Try This... Recharge or replace the Li-Ion battery. Reposition or replace AA batteries. Extreme operating temperatures may affect battery life. Refer to See "About the Li-Ion Battery" on page 14.
  • Motorola RDU2020 | User Guide - Page 59
    PTT button is completely pressed when transmitting. Confirm that the radios have the same Channel, Frequency, Interference Eliminator Code and Scramble Code settings. Refer to "Talking and Monitoring" section on page 29 for further information. Recharge, replace and/or reposition batteries. Refer
  • Motorola RDU2020 | User Guide - Page 60
    -in Charger LED light does not blink Low battery indicator is blinking although new batteries are inserted Recharge or replace Li-Ion battery. Replace AA batteries. Extreme operating temperatures affect battery life. Refer to "About the Li-Ion Battery" on page 14. Check that the radio/battery is
  • Motorola RDU2020 | User Guide - Page 61
    the battery has a problem. Refer to "Drop-in Tray Charger LED Indicators" section on page 25. Note: Whenever a feature in the radio seems to not correspond to the default or preprogrammed values, check to see if the radio has been programmed using the CPS with a customized profile. TROUBLESHOOTING
  • Motorola RDU2020 | User Guide - Page 62
    USE AND CARE USE AND CARE Use a soft damp cloth to clean the exterior Do not immerse in water If the radio is submerged in water... Do not use alcohol or cleaning solutions English 60 Turn radio OFF and remove batteries Dry with soft cloth Do not use radio until completely dry
  • Motorola RDU2020 | User Guide - Page 63
    information. These charts are useful when using Motorola RDX Series™ two-way radios with other business radios. Most of the frequency's positions are the same as Spirit M, GT, S, and XTN Series Frequencies. RDX VHF Frequencies Frequency # Frequency (MHz) Bandwidth 1 151.6250 25.0 kHz 2 151
  • Motorola RDU2020 | User Guide - Page 64
    (six in total) are different from the previous Motorola Legacy Series radios. This means that if you select the RDX radio in one of these frequencies the radio will not inter-operate with an XTN radio. In order for a RDX radio to inter-operate with an XTN radio, make sure you choose any of the
  • Motorola RDU2020 | User Guide - Page 65
    programmed in your RDX Radio. Note that the VHF default frequencies programmed in channels 1 and 2 are different from the XTN Series default values. In order for a RDX radio to inter-operate with an XTN radio, you must make sure you choose any of the frequencies (21 in total, read User Guide
  • Motorola RDU2020 | User Guide - Page 66
    INSTRUCTIONS The following instructions are a quick and easy way to make your XTN (XV1100, XV2100 and XV2600 models) compatible with RDX Series™ default frequencies: 1. Make sure your XTN is programmed to the factory default frequencies (Turn your radio ON while holding the MENU and PTT buttons
  • Motorola RDU2020 | User Guide - Page 67
    fully compatible with the AXV5100 radios (AX Series). If you need to make this radio compatible with XTN series, please re-program RDV5100 frequencies to match XTN frequencies defaults. RDX VHF 10CH Radios Default Frequencies - RDV5100 Channel Frequency # Frequency (MHz) Code # Code Bandwidth
  • Motorola RDU2020 | User Guide - Page 68
    AND CODE RDX UHF FREQUENCIES CHART RDX UHF Frequencies (cont.) Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) 1 464.5000 12.5/25.0 kHz 14 461.1625 2 464.5500 12.5/25.0 kHz 15 461.1875 *3 467.7625 12.5 kHz 16 461.2125 *4 467.
  • Motorola RDU2020 | User Guide - Page 69
    AND CODE RDX UHF Frequencies (cont.) Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) *27 462.8625 12.5 kHz 38 466.1375 *28 462.8875 12.5 kHz 39 466.1625 *29 462.9125 12.5 kHz 40 466.1875
  • Motorola RDU2020 | User Guide - Page 70
    AND CODE RDX UHF Frequencies (cont.) Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) *49 467.8375 12.5 kHz 61 467.1875 *50 467.8625 12.5 kHz 62 467.4625 *51 467.8875 12.5 kHz 63 467.4875 *
  • Motorola RDU2020 | User Guide - Page 71
    AND CODE RDX UHF Frequencies (cont.) Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) 73 452. .5 kHz 12.5 kHz 12.5 kHz - Notes: • (*) Frequency limited to 2W maximum power output • When referring to XTN radios, note that frequencies from # 57 to # 89 are 33 new additional
  • Motorola RDU2020 | User Guide - Page 72
    RDU2020 - UHF DEFAULT FREQUENCIES CHART Channel 1 2 RDX UHF 2CH Radios Default Frequencies - RDU2020 Frequency # Frequency (MHz) Code # Code Bandwidth 2 464.5500 1 67.0 Hz 25.0 kHz 8 467.9250 1 67.0 Hz 25.0 kHz Note: Compatible with XTN series radios FREQUENCY AND CODE English
  • Motorola RDU2020 | User Guide - Page 73
    the AXU4100 radios (AX Series). If you need to make this radio compatible with XTN series, please re-program RDU4100 frequencies to match XTN UHF frequencies defaults. FREQUENCY AND CODE Channel 1 2 3 4 5 6 7 8 9 10 RDX UHF 10 CH Radios Default Frequencies - RDU4100 Frequency # Frequency (MHz
  • Motorola RDU2020 | User Guide - Page 74
    FREQUENCY AND CODE CTCSS AND PL/DPL CODES CTCSS Hz 1 67.0 2 71.9 3 74.4 4 77.0 5 79.7 6 82.5 7 85.4 8 88.5 9 91.5 10 94.8 11 97.4 12 100.0 13
  • Motorola RDU2020 | User Guide - Page 75
    81 82 83 84 85 86 Code 243 244 245 251 261 263 265 271 306 311 315 331 343 346 351 364 73 English FREQUENCY AND CODE
  • Motorola RDU2020 | User Guide - Page 76
    FREQUENCY AND CODE DPL 87 88 89 90 91 92 93 94 95 96 97 98 Code 365 371 411 412 413 423 431 432 445
  • Motorola RDU2020 | User Guide - Page 77
    MODELS Certain 4W/5W Models can be programmed to have customized frequencies (different from the ones shown in the VHF and UHF charts in previous pages). VHF range is 146 -174 MHz and UHF 438 - 470 MHz. Certain 4W/5W models can also be programmed to work with repeaters. Please contact your Motorola
  • Motorola RDU2020 | User Guide - Page 78
    consumer and business two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products ("Accessories") and Motorola software contained on CD-ROMs
  • Motorola RDU2020 | User Guide - Page 79
    of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by
  • Motorola RDU2020 | User Guide - Page 80
    IS COVERED? This warranty extends only to the first consumer purchaser, and is not transferable. HOW TO OBTAIN WARRANTY SERVICE OR OTHER INFORMATION? Contact your Motorola point of purchase. SOFTWARE COPYRIGHT NOTICE The Motorola products described in this manual may include copyrighted Motorola and
  • Motorola RDU2020 | User Guide - Page 81
    the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product. PATENT NOTICE This product is covered by one or more of the following United
  • Motorola RDU2020 | User Guide - Page 82
    MHz UHF Whip Antenna 438 - 470 MHz AUDIO ACCESSORIES Part No. Description 53815 53862 53863 Headset w/Boom Mic BR Remote Speaker Mic BR Earpiece w/Mic BR English 80 Part No. Description 53865 53866 56517 56518 BATTERY Part No. Headset w/Swivel Boom Mic Earbud w/Clip PTT Mic BR Earpiece
  • Motorola RDU2020 | User Guide - Page 83
    Clip POWER SUPPLIES AC PIN ADAPTORS Part No. Description RLN6349 North America AC Pin Adaptor SOFTWARE APPLICATIONS Part No. Description RVN5147 Computer Programming Software (CPS) CABLES Part No. Description RLN6303 RKN4155 Radio to Radio Cloning Cable CPS Programming Cable CHARGERS
  • Motorola RDU2020 | User Guide - Page 84
    not be available at the time of purchase. For latest information on accessories, contact your Motorola point of purchase or visit: www.motorola.com/RDX or www.motorola.com/ radios/business (*) Americas Rapid Charging Kit includes Power Supply, Drop-in Tray Charger, and AC Pin adaptors. English 82
  • Motorola RDU2020 | User Guide - Page 85
    . To enable/disable Battery Save, press SB1 and SB2 simultaneously while turning ON the radio. Front panel radio programming is available in display models by pressing the MENU button and scrolling down/up with and buttons to set value. Long press PTT to save and exit. Buttons Reset No No Yes
  • Motorola RDU2020 | User Guide - Page 86
    or exit Channel Aliasing mode press PTT and buttons simultaneously while turning radio ON for 3 sec. After editing, to exit and save, long press PTT. Note: To edit, refer to Programming Features/ Editing Channels. You can select channels using the Channel Selector Knob (non-display models) or the
  • Motorola RDU2020 | User Guide - Page 87
    Cloning Cable or Multi-Unit Charger). Press PTT, SB2 while turning radio ON. Note: You can clone radios using the CPS. CPS Manager Lock No No Yes Yes This feature is referred in the CPS software as "Codeplug Password". It prevents unauthorized N/A access to the CPS to the radio's programmed
  • Motorola RDU2020 | User Guide - Page 88
    radio Interference Channel and programming. There are 122 codes available.For Eliminator Yes Yes Yes Yes Codes Model Dependant details refer to Frequencies and Codes Charts (CTCSS/DPL) Section. IVOX, enable/ Yes N/A N/A N/A disable OFF Hands free without accessories, available
  • Motorola RDU2020 | User Guide - Page 89
    Programming Tips HIGH (Level 3) Available for Display models only. Allows user to specify IVOX sensitivity level. For front panel radio programming use the MENU button radio LEDs Low Battery Alert - N/A N/A N/A N/A Shutdown Gives a sequence of loud and high beep tones to ON alert battery
  • Motorola RDU2020 | User Guide - Page 90
    Channels (2) Microphone Gain Level, ACCESSORY Microphone Gain Level, RADIO Monitor (4) Programmable Via RADIO PANEL Display NonDisplay Programmable via CPS Display NonDisplay Yes No Yes Yes Yes No Yes Yes Yes No Yes Yes Yes Yes Yes Yes Default Value Programming Tips Model
  • Motorola RDU2020 | User Guide - Page 91
    No No Yes Yes Default Value Programming Tips SB2 Button SB1 Button High Power (Model dependant) Press SB2 to start scanning and wait until the radio lands on the channel you want to delete. Long press SB2 to delete the channel. Note: The nuisance deleted channel will be restored into the scan
  • Motorola RDU2020 | User Guide - Page 92
    No No Yes Yes Reset to Factory Defaults (2) Yes Yes Yes Yes Reverse Burst No No Yes Yes Default Value Programming Tips MOTOROLA OFF Text that shows up in the radio display when turned ON. Default text is MOTOROLA. Programmable via CPS. Available only for RDU4160d model. Enabled 180
  • Motorola RDU2020 | User Guide - Page 93
    available only for Non Display Models. For front programming using front panel radio enter Programming Mode(1) Display models only: you can program scramble using front panel by going into Programming Mode(1). Use CPS to program to program how long the PTT can be pressed before the transmission
  • Motorola RDU2020 | User Guide - Page 94
    0) Front panel radio programming available in display models by pressing PTT or MENU buttons and scrolling down/up with and buttons to set value. Long press PTT to save. VOX, enable/ disable Yes Yes Yes Yes OFF Allows to use 'hands-free' mode connecting microphone accessories. To enable
  • Motorola RDU2020 | User Guide - Page 95
    Default N/A N/A N/A BUTTON A (*) BUTTON B (*) BUTTON C (*) Default Default Default Notes: • Buttons come programmed to default functions. Using CPS you can assign one of the features shown in the chart, so the button can toggle values using radio front panel • (*) Display models only. 93
  • Motorola RDU2020 | User Guide - Page 96
    Icon Battery Level Channel Code Frequency Keypad lock Program Scan Scramble 94 Symbol G L Comments Displayed during normal radio mode operation, displays battery life remaining Displayed during normal radio operation and when programming channel features Displayed during normal radio operation
  • Motorola RDU2020 | User Guide - Page 97
    Select Signal Strength Vox/IVox Symbol Comments Displayed whenever the channel is transmitting or set to a high-power selection RSSI Display Icon numbers of bars will indicate the strength of the received signal. Displayed when IVOX/VOX enabled or when programming MIC / MIC gain features. 95
  • Motorola RDU2020 | User Guide - Page 98
  • Motorola RDU2020 | User Guide - Page 99
    © 2007 Motorola Inc. All rights reserved. Motorola Technology Sdn Bhd (Co. No. 455657-H) Plot 2 Bayan Lepas Technoplex Industrial Park Mukim 12 S.W.D 11900 Penang, Malaysia Printed in Malaysia September 2007 *6871663M01* 6871663M01-A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99