Motorola SBG-940 User Guide - Page 102
Setting Up a USB Driver in Windows2000, Insert the SBG940 Installation CD-ROM in the CD-ROM drive.
View all Motorola SBG-940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License Configuration: Basic Gateway TCP/IP Wireless USB Setting Up a USB Driver in Windows 2000 1 Insert the SBG940 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be inserted and read by the PC before you connect the SBG940 to the PC. 2 Connect the USB cable as shown in USB Connection. A few seconds after you complete the USB connection, the Found New Hardware window is displayed: 3 Click Next. The following window is displayed: Although your SBG model number may be different than in the images in this guide, the procedure is the same. Be sure "Search for a suitable driver for my device" is selected. SBG940 User Guide 94
Overview
Installation
Troubleshooting
Contact
FAQ
Specifications
Glossary
License
Configuration:
Basic
Gateway
TCP/IP
Wireless
USB
SBG940 User Guide
94
Setting Up a USB Driver in Windows 2000
1
Insert the SBG940 Installation CD-ROM in the CD-ROM drive.
This CD contains the USB drivers and must be
inserted and read by the PC
before you connect the SBG940 to the PC.
2
Connect the USB cable as shown in
USB Connection
.
A few seconds after you complete the USB connection, the Found New Hardware window is displayed:
3
Click
Next
. The following window is displayed:
Be sure “Search for a suitable driver for my device” is selected.
Although your SBG model number may be different than in the images in this guide, the procedure is
the same.