Motorola SBG-940 User Guide - Page 31

Place the SBG940 so the keyholes on the back of the unit are aligned above the mounting screws.

Get Motorola SBG-940 PDF manuals and user guides View all Motorola SBG-940 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License Configuration: Basic Gateway TCP/IP Wireless USB 6 If necessary, seat an anchor in each hole. Use M5 x 38 mm (#10-16 x 11/2 inch) screws with a flat underside and maximum screw head diameter of 10.5 mm to mount the SBG940. 7 Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown: • There must be .16 inches (4.0 mm) between the wall and the underside of the screw head. • The maximum distance from the wall to the top of the screw head is 7.6 mm (.3 in). .3 inches (7.6 mm) maximum .4 inches (10.5 mm) maximum .16 inches (4.0 mm) 8 Place the SBG940 so the keyholes on the back of the unit are aligned above the mounting screws. Be sure you do not damage the antennas. 9 Slide the SBG940 down until it stops against the top of the keyhole opening. SBG940 User Guide 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
Overview
Installation
Troubleshooting
Contact
FAQ
Specifications
Glossary
License
Configuration:
Basic
Gateway
TCP/IP
Wireless
USB
SBG940 User Guide
23
6
If necessary, seat an anchor in each hole.
Use M5 x 38 mm (#10-16 x 1
1
/
2
inch) screws with a flat underside and maximum screw head diameter of
10.5 mm to mount the SBG940.
7
Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown:
•
There must be .16 inches (4.0 mm) between the wall and the underside of the screw head.
•
The maximum distance from the wall to the top of the screw head is 7.6 mm (.3 in).
8
Place the SBG940 so the keyholes on the back of the unit are aligned above the mounting screws.
Be sure you do not damage the antennas.
9
Slide the SBG940 down until it stops against the top of the keyhole opening.
.3 inches (7.6 mm) maximum
.4 inches (10.5 mm) maximum
.16 inches (4.0 mm)