Motorola SBG-940 User Guide - Page 78
WPA Authentication, Remote Radius, Local WPA-PSK, Save Changes, Reset Wireless Defaults, Remote - reset password
View all Motorola SBG-940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License Configuration: Basic Gateway TCP/IP Wireless USB 5 Choose the WPA Authentication type: Remote (Radius) Local (WPA-PSK) If a Remote Authentication Dial-In User Service (RADIUS) server is available, you can select this option and go to step 6. A RADIUS server is typically used in a large corporate location. If you choose Pre-Shared Key (PSK) local authentication, if the passphrase on any client supporting WPA matches the PSK Passphrase set on the SBG940, the client can access the SBG940 WLAN. To set the PSK Passphrase, go to step 7. A local key is typically used in a home or small office. 6 For Remote (Radius) authentication only, set: Radius Port The port used for remote authentication through a RADIUS server. It can be from 0 to 65535. Radius Key The key for remote authentication. It can be from 0 to 255 ASCII characters. Radius Server Currently IPv4 only. Type Radius Server The RADIUS server IP address in dotted-decimal format (xxx.xxx.xxx.xxx). 7 For Local (WPA-PSK) authentication only, set: PSK The PSK password containing from 8 to 63 ASCII characters. You must set the identical Passphrase passphrase on each WLAN client (see "Configuring a Wireless Client for WPA"). 8 Click Save Changes. If you need to restore the wireless defaults, click Reset Wireless Defaults. SBG940 User Guide 70