Motorola SBG-940 User Guide - Page 57
Gateway > PORT TRIGGERS — predefined
View all Motorola SBG-940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License Configuration: Basic Gateway TCP/IP Wireless USB Gateway > PORT FORWARDING - config page fields (continued) Field LAN IP Address Enable Add PORT FORWARDING Description Sets the private LAN IP address for the port forwarding page. An Internet user must know the public IP address to access any port forwarding entry you define on the private LAN. Select this box to enable the port forwarding entries to be accessed through NAT. Click to add the virtual server to the PORT FORWARDING list. Displays the configured custom virtual servers. Gateway > PORT TRIGGERS - predefined Page When you run a PC application that accesses the Internet, it communicates with a computer on the Internet. In some applications, especially gaming, the computer on the Internet also communicates with your PC. Because NAT does not normally allow these incoming connections, the SBG940 supports port triggering. The SBG940 is preconfigured with port triggering for common applications. You can also configure additional port triggers if needed. Configuring port triggers for an application requires: • The application transport protocol - TCP or UDP • The application port number You can use the default values for the remaining parameters. SBG940 User Guide 49