NEC 50XP10 User Manual - Page 14

Part Names and Functions - continued Remote Control Functions 7) KEYPAD Set REMOTE ID. POWER ON STANDBY 1 2 3 5 RGB DVD/HD VIDEO PICTURE MEMORY 8) DISPLAY Turn on/off the Information OSD. 9) Move selection up or down 10) AUTO SETUP Adjusts the CLOCK PHASE, CLOCK, and POSITION settings automatically. (Analog RGB signal input only) 11) POINTER Turn on/off the pointer. 15 4 6 PICTURE MODE SIZE 1 4 7 7 2 5 8 0 3 6 9 DISPLAY MENU 8 9 AUTO SET UP 12) VOLUME Increases/Decreases sound level. 13) SPLIT SCREEN PIP: Picture-in-Picture mode. S BY S: Side-by-side mode. SINGLE: Returns to normal mode. SWAP: Swaps the Split Screen images. When the QUICK SWAP function (see OSD OPTION4) is ON, SWAP can be used to change signal input. (Single screen mode) SELECT/FREEZE: Selects which input is active when in split screen mode. When the PIC FREEZE function (see OSD Option4) is operating, SELECT/FREEZE can be used to display still pictures on the sub screen. CAPTURE : Captures still picture. 14) REMOTE ID Activates REMOTE ID function. 15) MENU Turns ON/OFF menu mode. 16) SET Makes selection. 17) - , + Increases or decreases amount of adjustment. 18) EXIT Goes to the previous menu. 19) ZOOM Enlarges or reduces the picture. 20) MUTE Mutes audio output. 21) SLEEP Sleep timer. NOTE: Any buttons without a corresponding explanation will not work with the Plasmasync display. English-11 SET + EXIT ZOOM 16 17 18 10 11 VOL + 12 13 SWAP POINTER + 19 MUTE SPLIT SCREEN PIP S BY S 20 SINGLE SELECT/FREEZE CAPTURE REMOTE ID SET RESET SLEEP 14 21 REMOTE CONTROLLER RU-M113 1) POWER ON/STANDBY Switches the power on/standby. *If the Power Indicator on the display is not glowing, then no controls will work. 2) VIDEO Switches the input signal to the VIDEO source. 3) RGB Switches the input signal to the RGB source. 4) DVD/HD Switches the input signal to the DVD/HD source. 5) PICTURE MODE Selects Picture Mode: [STANDARD], [BRIGHT], [CINEMA1], [CINEMA2], [DEFAULT]. STANDARD: for viewing in a bright room BRIGHT: brighter picture than STANDARD CINEMA1, 2: for viewing in a dark room, good for movies DEFAULT: factory default settings 6) SIZE Set the aspect ratio of the image.