NEC 50XP10 User Manual - Page 20

On-Screen Display (OSD) Main Menu OPTION2 Available only when the Advanced OSD function is enabled. Sub Menu POWER SAVE Sub Menu2 Sub Menu3 Explanation Sets how long the monitor waits before going into power save mode after a signal is lost. VGA, RGBHV, and DVI input and Separate HV Sync. only. Selects Film mode. Default OFF Reset YES FILM MODE ON YES SCREEN SAVER PLE ORBITER INVERSE WORKING TIME /WAITING TIME Use SCREEN SAVER functions to reduce the risk of image retention. PLE: The brightness is decreased in order of Lock mode. (the higher number is darker) ORBITER: The screen image moves and is slightly squeezed or expanded. INVERSE: The screen image is displayed alternately between positive image and negative image, or the screen image is displayed full white. Cooling fan reduces the temperature of the display. Adjusts the color of the side mask when a 4:3 image is displayed. Press + button, the bar will become lighter. Press - button, the bar will become darker. When it is set to "OFF", TRUE of picture size appears only RGB signals. PLUG/PLAY BLACK LEVEL Choose the DVI mode based on the input device connected via DVI connector and set the black level. When a PC or similar equipment is connected, the PLUG/ PLAY setting should be "DVI-PC" and the BLACK LEVEL setting should be "LOW". When a DVD player or similar equipment is connected, PLUG/PLAY setting should be "DVI-HD" and the BLACK LEVEL setting should be "HIGH". Sets protocol setting for use with RS-232C connection. OFF: When NEC protocol is used (normal). ON: When special protocol is used. Consult dealer for details of protocol. Choose the closed caption setting. Chooses the brightness of the closed captions. PRESENT TIME DAYLIGHT SAVING TIME DAY/HOUR/ MINUTE TIMER Creates a working schedule for the monitor to use. See page 24 for instructions. Sets the input mode and the sound volume when the power is turned on. LAST: Uses the input that was last selected when the power was turned off. MULTI to DVI: Fixed input mode. AUTO: Automatically searches for the input signal. PRIORITY: Sets which input has priority when using the AUTO setting. This function completely locks out access to all Control Key functions. When this item is set to "ON", the front panel is disabled as soon as the on-screen menu goes off. When "OFF", prevents the monitor from being controlled by wireless remote controller. The remote becomes ineffective disabled as soon as the on-screen menu goes off. To return to normal operation, press the "DISPLAY" button on the remote controller for 5 seconds. Change the loop out setting. Sets the Monitor ID to a number from 1-26 and or to ALL. Selects the mode of the monitor when using the RS-232C daisy chain. OFF LAST LAST Sets the date, time, and daylight saving region. Day & time must be set in order for the "TIMER" function to operate. AUTO AUTO1 OFF YES YES YES COOLING FAN SIDE MASK AUTO 3 NO YES PICTURE SIZE DVI MODE ON DVI-PC LOW YES NO NO PROTOCOL SET OFF YES CLOSED CAPTION U.S. models only CAPTION CONT U.S. models only OPTION3 Available only when the Advanced OSD function is enabled. TIMER OFF NORMAL OFF YES YES NO NO YES YES YES INPUT DETECT INPUT VOLUME CONTROL LOCK OFF YES IR REMOTE ON YES LOOP OUT MONITOR ID RS232C CONTROL OFF ALL NORMAL YES YES YES English-17