NEC LCD1830 MultiSync LCD1830 User's Manual - Page 10
Image Adjust Controls, AccuColor, Control Systems, Tools 1 - resolution
UPC - 805736000658
View all NEC LCD1830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Controls -continued Image Adjust Controls H.SIZE Adjusts the horizontal size by increasing or decreasing this setting. FINE Improves focus, clarity and image stability by increasing or decreasing this setting. AUTO ADJUST Automatically adjusts H. SIZE and FINE settings. AccuColor® Control Systems Six color presets select the desired color setting (two of the color presets are standard and cannot be changed). Color temperature increases or decreases in each preset. R,Y,G,C,B,M,S: Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the color bars. Tools 1 SMOOTHING: Select one of three image sharpness settings. This function is only valid when the expanded display function (expansion function)is on. TEXT MODE: Use this to display text clearly. NORMAL MODE: This sharpness is between TEXT and GRAPHIC MODE. GRAPHIC MODE: This mode is suited for images and photographs. EXPANSION MODE: Sets the zoom method. FULL SCREEN: The image is expanded to 1280 x 1024, regardless of the resolution. KEEP ASPECT: The image is expanded without changing the aspect ratio. EXPANSION OFF: The image is not expanded. VIDEO DETECT: Selects the method of video detection when more than one computer is connected. NONE: The Monitor will not search the other video input port unless the monitor is turned on. FIRST DETECT: The video input has to be switched to "FIRST DETECT" mode. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. The monitor will not look for other video signals while the current video source is present. LAST DETECT: The video input has to be switched to the "LAST DETECT" mode. When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, then the monitor will automatically switch to the new video source. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. 8 LCD1830.wpc 10 11/29/00, 9:56 AM