NEC M40-AV M40/M46 User Manual - Page 16
Part Names and Functions - tuner
![]() |
UPC - 805736018417
View all NEC M40-AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Part Names and Functions Control Panel 9 OFF ON 10 Buttons and Main Power EXIT INPUT MUTE Switch are located underneath and behind the bezel. 8 7 6 5 4 3 2 1 1) POWER Switches the power on/off. (See page 24) 2) MUTE Switches the audio mute ON/OFF. 3) INPUT Selects which signal connected to the display is shown. ([DVI], [VGA], [RGB/HV], [HDMI], [DVD/HD], [VIDEO], [TV]) Acts as SET button within the OSM menu. 4) PLUS (+) Increases the setting adjustment within OSM menu. Increases the audio output level when the OSM is off. 5) MINUS (-) Decreases the setting adjustment within OSM menu. Decreases the audio output level when the OSM is off. 8) EXIT Activates the OSM menu when the OSM menu is off. Exits from the current menu being displayed to the previous menu within the OSM. 9) Remote control sensor and Power indicator Receives the signal when using the wireless remote control. (See page 14) Glows green when the LCD monitor is in active. Glows red when the LCD is in POWER OFF (ECO standby) mode. Glows Amber when the LCD is in POWER OFF (standby). Amber blinks when the monitor is in Power Save Mode. Green and Amber blink alternately while in Power Standby with the "SCHEDULE SETTINGS" function enabled. When a component failure is detected within the monitor, the indicator will blink red. 10) Main Power Switch Seesaw Switch for the main power on/off. 6) UP (▲) Activates the OSM menu when the OSM menu is off. Moves the highlighted area up to select which setting to be adjust within OSM menu. 7) DOWN (▼) Activates the OSM menu when the OSM menu is off. Moves the highlighted area down to select which setting to be adjust within OSM menu. Control Key Lock Mode This function completely locks out access to all Control Key functions. To enable the Control Key Lock Mode, press both "▲" and "▼" simultaneously and hold down for three (3) seconds. To go back to user mode, press both "▲" and "▼" simultaneously and hold down for three (3) seconds. Denotes AV unit function. All AV functions are enabled with the AV unit is installed. Not all models have the AV unit installed. Denotes Digital Tuner function. All DTV and AV functions are enabled when the DTV unit is installed. Not all models will have the digital tuner installed. English-10
![](/manual_guide/products/nec-m40av-m40m46-user-manual-962e6e8/16.png)