NEC M40-AV M40/M46 User Manual - Page 37

OSM Controls - continued English ADVANCED OPTION INPUT DETECT All inputs except for TV NONE FIRST DETECT DVI, VGA, RGB/HV input only LAST DETECT DVI, VGA, RGB/HV input only Selects the method of input detection the monitor uses when more than two input devices are connected. The Monitor will not search the other video input ports. When the current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. The monitor will not look for other video signals while the current video source is present. When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, the monitor will automatically switch to the new video source. When current video input signal is not present, the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. VIDEO DETECT DVD/HD or VIDEO inputs will have priority over DVI, VGA, and RGB/HV. When DVD/HD or VIDEO input signal is present the monitor will change and keep to the DVD/HD or VIDEO input. LONG CABLE ON/OFF Compensates for image degradation caused from using a long cable. VGA and RGB/HV input only LONG CABLE MANUAL Manually compensates for image degradation caused from using a long cable. VGA and RGB/HV input only RED DELAY Adjusts the phase of the red signal. GREEN DELAY Adjusts the phase of the green signal. BLUE DELAY Adjusts the phase of the blue signal. RED SHARPNESS Adjusts the performance degradation of the RED signal. GREEN SHARPNESS Adjusts the performance degradation of the GREEN signal. BLUE SHARPNESS Adjusts the performance degradation of the BLUE signal. SOG PEAK. Adjusts the shape of Sync on Green signal. VIDEO EQ. Optimize the shape (Tailing) of RED, GREEN and BLUE signals. SYNC TERMINATE Selects the terminate resistance for matching the cable impedance. DVI MODE Choose the DVI mode based on the input device connected via DVI connector. DVI-PC DVI-HD When a PC or similar equipment is connected. When a DVD player is connected. SCAN CONVERSION Selects the IP (Interlace to Progressive) conversion function. PROGRESSIVE INTERLACE Converts interlaced signals to progressive. This is the default setting. Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image retention. SCART MODE Input mode for devices using SCART connectors. S-VIDEO MODE Selects the S-Video input port function. PRIORITY When an S-Video cable is connected to the S-Video input, it will have priority over the composite input port. SEPARATE The S-Video port and Composite port can be selected as independent input ports. COLOR SYSTEM VIDEO input only The selected Color System depends on the video format of the input signal. AUTO NTSC PAL SECAM 4.43NTSC PAL-60 Automatically chooses Color System setting based on input signal. English-31