NEC M40-AV M40/M46 User Manual - Page 19

English Part Names and Functions - continued 13) REMOTE ID Activates REMOTE ID function. See page 15. 14) GUIDE Enter on screen program guide. 15) AUDIO INPUT Select the Audio source NOTE: It is possible to play audio from a source that is different from the video source. When setting parental controls for video, be aware that this content is not filtered. 16) SOUND Artificial surround sound. 17) ENTER Go to channel selected. 18) MENU Turns ON/OFF menu mode. 19) SET Makes selection. 20) - , + Increases or decreases adjustment. Moves the PIP sub-picture. 21) EXIT Goes to previous menu. 22) Channel Go up or down channel selections. 23) MUTE Mutes audio output 24) Activates closed captioning. 25) SLEEP Sleep timer. 26) MTS Multi-track sound. Changing the channel Both Analog and Digital channels are available using this tuner. In addition to the CH+ and CH- buttons channels can be changed in the following method. Tuning Analog Channels Input the desired channel number using the keypad, then press [SET] or [ENT] to immediately tune to the new channel. If the number is input and [SET] or [ENT] is not pushed, after a few seconds the channel will be changed. For example to tune to channel 5, press [5] then press [SET] or [ENT]. Tuning Digital Channels To tune in to a digital sub-channel enter the number of the main channel, then a dash followed by the number of the sub-channel. For example to tune to digital channel 5-1, press [5] then [-] then [1]. Press [SET] or [ENT] to tune. Denotes AV unit function. All AV functions are enabled with the AV unit is installed. Not all models have the AV unit installed. Denotes Digital Tuner function. All DTV and AV functions are enabled when the DTV unit is installed. Not all models will have the digital tuner installed. English-13