NEC M40-AV M40/M46 User Manual - Page 34
English-28
![]() |
UPC - 805736018417
View all NEC M40-AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
OSM Controls - continued CLOCK PHASE VGA, RGB/HV, DVD/HD input only H RESOLUTION DVI, VGA, RGB/HV input only V RESOLUTION DVI, VGA, RGB/HV input only ZOOM MODE BASE ZOOM 16:9 14:9 DYNAMIC OFF CUSTOM ZOOM H ZOOM V ZOOM H POS V POS INPUT RESOLUTION VGA and RGB/HV input only AUTO 1024x768 1280x768 1360x768 1366x768 1440x1050 1680x1050 ADJUST RESET Adjusts the visual "noise" on the image. Adjusts the horizontal size of the image. Adjusts the vertical size of the image. Select the aspect ratio of the screen image. Choose the zoom method Same aspect ratio as the LCD panel. 14:9 Expands a 4:3 picture to fill the screen in a non-linear (non-proportionate) manner and some of the image will be lost due to expansion. DYNAMIC is the same as FULL size image when HDTV 1080i signal is input. Selecting "OFF" will display the image in a 1 by 1 pixel format. (If the input resolution is higher than a 1920 x 1080 resolution, the image will be scaled down to fit the screen. Displays an image as large as possible without changing the aspect ratio or cutting off part of the image. Maintains the aspect ratio while zooming. Amount of horizontal zoom. Can be adjusted for each BASE ZOOM setting. Amount of vertical zoom. Can be adjusted for each BASE ZOOM setting. Horizontal position. Can be adjusted for each BASE ZOOM setting. Vertical position. Can be adjusted for each BASE ZOOM setting. If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. If no problem is detected, the only available option will be "AUTO". Resets the following settings within the ADJUST menu back to factory setting: AUTO ADJUST, H POSITION, V POSITION, CLOCK, CLOCK PHASE, H RESOLUTION, V RESOLUTION, ZOOM MODE, INPUT RESOLUTION. AUDIO BALANCE TREBLE BASS PIP AUDIO AUDIO RESET Selects source of PIP audio. Resets "AUDIO" options back to factory settings. SCHEDULE OFF TIMER SCHEDULE SETTING SCHEDULE LIST DATE & TIME Sets the monitor to power off after a length of time between 1 and 24 hours. Creates a working schedule for the monitor to use. See page 34 for instructions. List of schedules. Sets the date, time, and daylight saving region. Date & time must be set in order for the "SCHEDULE" function to operate. English-28
![](/manual_guide/products/nec-m40av-m40m46-user-manual-962e6e8/34.png)