NEC OP-720-69001 User Guide - Page 12

2-4 RealPort Ethernet 10/100Modem 56 User's Guide Any device attempting to use the same memory segments as another device will cause the card to fail initialization. Ideally there should be 12K of contiguous memory starting with the first 4K block following the video drivers, which typically load in the C0000-C7FFF range. This varies from computer to computer. The memory range identified for the Xircom card is any block in the C0000-E7FFF range. On many computers, use of the range D0000-DFFFF is optimal. Be aware that not all blocks of memory are available. Failure to access to network resources may be due to Windows 95 or 98 network configuration issues. 1 In Control Panel, double-click the Network icon. 2 In the configuration window verify that the correct Network Clients are installed. • To install a Microsoft Network Client, click Add. Doubleclick Client. Under the Manufacturers list, select Microsoft. Double-click Client for Microsoft Networks. • To install a Novell Network Client, click Add. Doubleclick Client. Under the Manufacturer list, select Microsoft. Double-click Client for NetWare Networks. 3 In the configuration window verify that the correct Network Protocols are installed. • To install the native Microsoft Network Protocol, doubleclick Protocols. Click Add. Under the Manufacturers list, select Microsoft. Double-click NetBEUI. • To install the IPX/SPX compatible Protocol, double-click Protocols. Click Add. Under the Manufacturers list, select Microsoft. Double-click IPX/SPX compatible Protocol. If necessary, consult your network administrator for additional information regarding client and protocol configuration details.