NEC OP-720-69001 User Guide - Page 16

3-2 RealPort Ethernet 10/100+Modem 56 User's Guide Modem Setup 13 After restarting, select Modems from the Control Panel. 14 At the Install New Modem screen make sure that the Don't detect my modem; I will select it from a list checkbox is NOT checked. Click Next. NT will query the COM ports looking for the Xircom modem. • If the Xircom modem is detected as a Standard Modem, choose Change. Re-insert the Xircom diskette, click Have Disk and type the path A:\NT40, then click OK. The Install New Modem Models dialog box will display with "Modem of Xircom Ethernet 10/100 + Modem 56" highlighted. Click OK to return to the previous screen. Choose Next. The file MDMCEM56.INF in the directory \NT40 on the Windows 95/98/NT Installation Disk is the modem INF file required for installation under Windows NT 4.0. 15 At the Install New Modem screen click Finish. 16 At the Modems Properties screen click Dialing Properties to set up dialing properties (not necessary if a modem had been previously installed). Click Close. 17 Use Start/Run to execute A:\SETUP.EXE from the Xircom diskette. Xircom utilities and online documentation will be installed in a program group on your hard drive. Power-Saving Modes The Xircom RealPort Ethernet 10/100+Modem 56 adapter has three modes that can be used to reduce power consumption by disabling a function that is not being used: Network-only, Modemonly, and Network & Modem (default). Before using Modem-only with Network Services installed, be sure the Network-disabled hardware profile box is checked under My Computer, Properties, Hardware Profiles, Properties, Network. Otherwise Network Services may report errors based on its failure to find the Xircom network driver.