Netgear DM111Pv2 DM111Pv2 User Manual - Page 13

Chapter 1 Configuring Your Internet Connection This chapter describes how to configure your ADSL2+ Modem Router DM111P(U)v2 Internet connection. When you perform the initial configuration of your modem router using the Resource CD as described in the ADSL2+ Modem Router Setup Manual, these settings are configured automatically for you. This chapter provides further details about these settings, as well as instructions on how to log in to the modem router for further configuration. Note: NETGEAR recommends using the Smart Wizard™ Installation Assistant on the Resource CD for initial configuration, as described in the ADSL2+ Modem Router Setup Manual. This chapter includes: • "Installation Requirements" in the following section. • "Using the Smart Wizard to Set Up Your Modem Router" on page 1-2. • "Logging In to the Modem Router" on page 1-2. • "Setting Up Your Modem Router Manually" on page 1-4. • "LAN IP Setup" on page 1-9. • "How the Internet Connection Works" on page 1-10. Installation Requirements Before installation, please have your DSL log in user name and password available. If not available, please obtain them from your Internet Service Provider (ISP) at the numbers below and IMMEDIATELY FOLLOW NETGEAR INSTALLATION PROCEDURES located in the Smart Wizard installation CD. • For Earthlink customers, please call 1-800-EARTHLINK. • For AT&T customers, please call 1-877-722-3755. Configuring Your Internet Connection 1-1 v1.0, October 2008