Netgear DM111Pv2 DM111Pv2 User Manual - Page 20

Table 1-2., ADSL Settings, The following table describes the settings for the ADSL Settings screen. - bridge

Get Netgear DM111Pv2 - ADSL2+ Ethernet Modem PDF manuals and user guides View all Netgear DM111Pv2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

ADSL2+ Modem Router User Manual The following table describes the settings for the ADSL Settings screen. Table 1-2. ADSL Settings Settings VPI VCI Protocol Multiplexing Method PPP username PPP password Disconnect if no activity (in minutes) MTU Size (in bytes) Description The Virtual Path Identifier (VPI) identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. The Virtual Channel Identifier (VCI) identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 31 are reserved for well-known protocols). Select the service that is provided by your ISP: • RFC2684 Bridging. Multiprotocol Encapsulation over ATM Adaptation Layer 5 service. • PPPoE Bridging. PPP over Ethernet service. • PPPoA Bridging. PPP over ATM service. Select the multiplexing service that is provided by your ISP: • LLC-Based. Logical link control multiplexing. • VC-Based. Virtual circuit multiplexing. Enter your login user name. This fields is case-sensitive. Enter you login password. This fields is case-sensitive. This is also known as the PPP idle timer. When the PPP idle timer is configured as zero, the PPP connection remains always on. However, when the PPP idle timer has a value other than zero, the PPP connection will be terminated when the configured period of inactivity is reached. 1492 bytes is the default value for PPPoE. 1500 bytes is the default value for PPPoA. Do not changes these values unless your ISP asks you to do so. 1-8 Configuring Your Internet Connection v1.0, October 2008

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
ADSL2+ Modem Router User Manual
1-8
Configuring Your Internet Connection
v1.0, October 2008
The following table describes the settings for the ADSL Settings screen.
Table 1-2.
ADSL Settings
Settings
Description
VPI
The Virtual Path Identifier (VPI) identifies the virtual path between
endpoints in an ATM network. The valid range is from 0 to 255.
VCI
The Virtual Channel Identifier (VCI)
identifies the virtual channel
endpoints in an ATM network. The valid range is from 32 to 65535 (1 to
31 are reserved for well-known protocols).
Protocol
Select the service that is provided by your ISP:
•
RFC2684 Bridging
. Multiprotocol Encapsulation over ATM
Adaptation Layer 5 service.
•
PPPoE Bridging
. PPP over Ethernet service.
•
PPPoA Bridging
. PPP over ATM service.
Multiplexing Method
Select the multiplexing service that is provided by your ISP:
•
LLC-Based
. Logical link control multiplexing.
•
VC-Based
. Virtual circuit multiplexing.
PPP username
Enter your login user name. This fields is case-sensitive.
PPP password
Enter you login password. This fields is case-sensitive.
Disconnect if no activity (in
minutes)
This is also known as the PPP idle timer. When the PPP idle timer is
configured as zero, the PPP connection remains always on. However,
when the PPP idle timer has a value other than zero, the PPP
connection will be terminated when the configured period of inactivity is
reached.
MTU Size (in bytes)
1492 bytes is the default value for PPPoE. 1500 bytes is the default
value for PPPoA. Do not changes these values unless your ISP asks
you to do so.