Home » Netgear Manuals » Wireless » Netgear EX2700 » Manual Viewer

Netgear EX2700 User Manual - Page 22

Monitor and Maintain the Extender

Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

4. Monitor and Maintain the Extender 4 This chapter covers the following topics: • Back Up the Extender Configuration • Restore Saved Configuration Settings • Return the Extender to Its Factory Settings • Upgrade the Firmware • View Wired and Wireless Network Devices 22

Section	Page
N300 WiFi Range Extender	1
Contents	3
1. Get to Know Your Extender	4
Meet Your Extender	5
How the Extender Works	6
When to Use Your Extender	6
2. Install Your Extender	7
Place the Extender and Apply Power	8
Connect to an Existing WiFi Network	8
Extender WiFi Performance	11
Cable a Computer or Device to the Ethernet Port	11
3. Manage the Extender Network and Settings	13
Log In to the Extender After Initial Setup	14
Change the admin Password	14
Use the Setup Wizard to Connect the Extender to a Network	15
Add a WPS Client to the Extender Network	17
View or Change Wireless Settings	17
View or Change Advanced Wireless Settings	18
Set Up a Wireless Access List	19
Set Up the Extender to Use a Static IP Address	21
4. Monitor and Maintain the Extender	22
Back Up the Extender Configuration	23
Restore Saved Configuration Settings	23
Return the Extender to Its Factory Settings	24
Use the Factory Reset Button to Restore Factory Settings	24
Erase the Extender Settings and Return to Factory Settings	25
Upgrade the Firmware	26
View Wired and Wireless Network Devices	27
5. FAQs and Troubleshooting	29
FAQs	30
Cannot Log In to the Extender	31
Cannot Join the Extender WiFi Network	32
A. Supplemental Information	33
Factory Default Settings	34