Netgear FVX538 FVX538 Reference Manual - Page 109
Creating a VPN Tunnel Connection to a VPN Client, VPN Wizard, VPN Client, VPN tunnel connection
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
ProSafe VPN Firewall 200 FVX538 Reference Manual Figure 5-6 Creating a VPN Tunnel Connection to a VPN Client You can set up multiple Gateway VPN tunnel policies through the VPN Wizard. Multiple remote VPN Client policies can also be set up through the VPN Wizard by changing the default End Point Information settings. A remote client policy can support up to 200 clients. The remote clients must configure the "Local Identity" field in their policy as "PolicyName.fvx_remote.com", where X stands for a number from 1 to 200. As an example, if the client-type policy on the router is configured with "home" as the policy name, and if two users are required to connect using this policy, then the "Local Identity" in their policy should be configured as "home1.fvx_remote.com" and "home2.fvx_remote.com", respectively. To configure the VPN client: 1. Select VPN from the main menu and VPN Wizard from the submenu. The VPN Wizard screen will display. 2. Check the VPN Client radio box as your VPN tunnel connection. The wizard needs to know if you are planning to connect to a remote Gateway or setting up the connection for a remote client/PC to establish a secure connection to this device. Virtual Private Networking 5-7 v1.0, August 2006