Netgear FVX538 FVX538 Reference Manual - Page 194
C-1, Configuring Dynamic
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
ProSafe VPN Firewall 200 FVX538 Reference Manual - You can also add your own service protocols to the list (see "Services-Based Rules" on page 4-2 for information on how to do this). 3. Set up your accounts a. Have active Internet services such as that provided by cable or DSL broadband accounts and locate the Internet Service Provider (ISP) configuration information. • In this document, the WAN side of the network is presumed to be provisioned as shown in Figure C-1with two ISPs connected to the VPN firewall through separate physical facilities. • Each FVX538 WAN port must be configured separately, however, whether you are using a separate ISP for each WAN port or are having the traffic of both WAN ports routed through the same ISP. You will need your ISP information for "Configuring the Internet Connections to Your ISPs" on page 2-2. customer premises WAN port 1 FVX538 firewall WAN port 2 route diversity physical facility 1 physical facility 2 ISP 1 ISP 2 Internet Figure C-1 • If your ISPs charge by the amount of bandwidth you use each month, you may want to consider setting up a traffic meter to keep track of your traffic (see "To manually configure your WAN1 ISP Settings:" on page 2-5 if you want to do this). b. Contact a Dynamic DNS Service and set up your fully qualified domain names if you need or want them. You will need your fully qualified domain names for "Configuring Dynamic DNS (If Needed)" on page 2-15. 3. Plan your network management approach • The VPN firewall is capable of being managed remotely, but this feature must be enabled locally after each factory default reset. You are strongly advised to change the default password password to something that is more secure at the time you enable remote management. You make these selections during "Logging into the VPN Firewall" on page 2-1. C-2 Network Planning for Dual WAN Ports v1.0, August 2006