Netgear FVX538 FVX538 Reference Manual - Page 195
Cabling and Computer Hardware Requirements, Computer Network Configuration Requirements
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
ProSafe VPN Firewall 200 FVX538 Reference Manual • There are a variety of WAN options you can choose when the factory default settings are not applicable to your installation. These include enabling a WAN port to respond to a ping and setting MTU size, port speed, and upload bandwidth. You will make these choices in "Configuring the Advanced WAN Options (If Needed)" on page 2-18. 4. Prepare to physically connect the firewall to cable or DSL modems and a computer. Instruction for connecting your VPN firewall are in Installation Guide, FVX538 ProSafe VPN Firewall 200. Cabling and Computer Hardware Requirements To use the VPN firewall on your network, each computer must have an installed Ethernet Network Interface Card (NIC) and an Ethernet cable. If the computer will connect to your network at 100 Mbps, you must use a Category 5 (CAT5) cable such as the one provided with your firewall. Computer Network Configuration Requirements The FVX538 includes a built-in Web Configuration Manager. To access the configuration menus on the FVX538, your must use a Java-enabled Web browser program that supports HTTP uploads such as Microsoft Internet Explorer or Netscape Navigator. NETGEAR recommends using Internet Explorer or Netscape Navigator 4.0 or above. Free browser programs are readily available for Windows, Macintosh, or UNIX/Linux. For the initial connection to the Internet and configuration of your firewall, you will need to connect a computer to the firewall that is set to automatically get its TCP/IP configuration from the firewall via DHCP. Note: For help with DHCP configuration, please refer to the link in Appendix B, "Related Documents." The cable or DSL modem broadband access device must provide a standard 10 Mbps (10BASE-T) Ethernet interface. Internet Configuration Requirements Depending on how your ISPs set up your Internet accounts, you will need one or more of these configuration parameters to connect your firewall to the Internet: • Host and Domain Names • ISP Login Name and Password • ISP Domain Name Server (DNS) Addresses Network Planning for Dual WAN Ports C-3 v1.0, August 2006