Netgear FVX538 FVX538 Reference Manual - Page 30
Configuring the Internet Connections to Your ISPs, admin, password, Login., WAN1 ISP Settings, Network
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
ProSafe VPN Firewall 200 FVX538 Reference Manual 2. When prompted, enter admin for the firewall user name and password for the firewall password, both in lower case letters. (The firewall user name and password are not the same as any user name or password you may use to log in to your Internet connection.) 3. Click Login. Note: You might want to enable remote management at this time so that you can log in remotely in the future to manage the firewall (see "Enabling Remote Management Access" on page 6-10). If you enable remote management, you are strongly advised to change your password (see "Changing Passwords and Settings" on page 6-8). Configuring the Internet Connections to Your ISPs You should first configure your Internet connections to your ISPs on WAN port 1, and then configure WAN port 2 second. To automatically configure the WAN ports and connect to the Internet: 1. The WAN1 ISP Settings screen similar to the one shown in Figure 2-1 should display when you log in. (If the screen does not display, select the primary menu option Network Configuration and the sub-menu option WAN Settings. 2-2 Connecting the FVX538 to the Internet v1.0, August 2006