Netgear FVX538 FVX538 Reference Manual - Page 24
Router Rear Panel, Table 1-1., Object Descriptions, continued - console
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ProSafe VPN Firewall 200 FVX538 Reference Manual Table 1-1. Object Descriptions (continued) Object Activity 6. Console DB9 male connector Port 7. Factory -> push in with a Defaults sharp object Description Port for connecting to an optional console terminal. Default baud rate is 115.2K; pinouts: (2) Tx, (3) Rx, (5) and (7) Gnd. Factory Defaults reset push button (see Appendix A, "Default Settings and Technical Specifications" for the factory defaults). Router Rear Panel The rear panel of the ProSafe VPN Firewall 200 (Figure 1-2) contains the On/Off switch and AC power connection. Figure 1-2 1 2 Viewed from left to right, the rear panel contains the following elements: 1. AC power in 2. On/Off switch 1-8 Introduction v1.0, August 2006
ProSafe VPN Firewall 200 FVX538 Reference Manual
1-8
Introduction
v1.0, August 2006
Router Rear Panel
The rear panel of the ProSafe VPN Firewall 200 (
Figure 1-2
) contains the On/Off switch and AC
power connection.
Viewed from left to right, the rear panel contains the following elements:
1.
AC power in
2.
On/Off switch
6.
Console
Port
DB9 male connector
Port for connecting to an optional console terminal. Default baud rate
is 115.2K; pinouts: (2) Tx, (3) Rx, (5) and (7) Gnd.
7.
Factory
Defaults
—> push in with a
sharp object
Factory Defaults reset push button (see
Appendix A, “Default
Settings and Technical Specifications”
for the factory defaults).
Figure 1-2
Table 1-1.
Object Descriptions
(continued)
Object
Activity
Description
1
2