Netgear GS108T GS108T Setup Manual - Page 15
Getting Started with Switch Management, System Requirements - dhcp
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 1 Getting Started with Switch Management This chapter provides an overview of switch management, including the methods you can choose to start managing your NETGEAR GS108T Gigabit Smart Switch. It also leads you through the steps necessary to get started, using the Smart Wizard Discovery utility. The information is discussed in the following sections: • "System Requirements" • "Switch Management Interface" • "Network with a DHCP Server" • "Network without a DHCP Server" • "Web Access" • "Additional Utilities" System Requirements The following hardware and software facilities are required to run the applications described in this manual: • Network facilities: - Ethernet network with or without DHCP server as appropriate - Ethernet cable to connect the switch to a PC • For running the Smart Wizard Discovery utility and local or remote Web management: - IBM-type PC with CD drive. RAM size and disk specification are not critical. - OS software. Microsoft Windows Vista, Windows XP, or Windows 2000. - Desktop computer running Microsoft Internet Explorer 5.0 or later or Netscape Navigator 6.0 or later, or equivalent. Note: For complete hardware installation instructions, see the GS108T Smart Switch Hardware Installation Guide included on your Resource CD, or go to http://www.netgear.com/support. 1-1 v1.0, December 2007