Netgear GS108T GS108T Setup Manual - Page 18
Network without a DHCP Server, Web Access, password - default password
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
GS108T Smart Switch Software Administration Manual 6. Make a note of the displayed IP address assigned by the DHCP server. You will need this value to access the switch directly from a Web browser (without using the Smart Wizard Discovery utility). 7. Select your switch by clicking the line that shows it. Then click the Web Access button. The discovery utility displays a login window similar to the following: . Figure 1-2 Use your Web browser to manage your switch. The default password is password. Then use this screen to proceed to management of the switch, as covered in Chapter 2, "Introduction to the Web Browser Interface." Network without a DHCP Server This section describes how to set up your switch in a network without a DHCP server, and is divided into the following tasks: • Manually assign network settings for your switch. • Configure the NIC settings on the host PC. • Log in to the Web-based switch management utility. 1-4 Getting Started with Switch Management v1.0, December 2007