Netgear GS108T GS108T Setup Manual - Page 22
Password Change, Firmware Upgrade, in the main screen see - firmware download
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
GS108T Smart Switch Software Administration Manual Password Change You can set a new password of up to 20 ASCII characters. 1. Click Password Change in the Switch Setting section. The Password Change screen displays. You can set a new password. 2. Enter the old password. 3. Enter the new password, and enter is again to confirm it. 4. Click Set to enable the new password. Firmware Upgrade . Note: You can also upgrade the firmware using the File Download screen of the switch (see "File Download" on page 6-20). If you click Firmware Upgrade in the main screen (see Figure 1-1 on page 1-3), after you have selected the switch to upgrade, the following screen displays: . Figure 1-6 1-8 Getting Started with Switch Management v1.0, December 2007
GS108T Smart Switch Software Administration Manual
1-8
Getting Started with Switch Management
v1.0, December 2007
Password Change
You can set a new password of up to 20 ASCII characters.
1.
Click
Password Change
in the Switch Setting section. The Password Change screen displays.
You can set a new password.
2.
Enter the old password.
3.
Enter the new password, and enter is again to confirm it.
4.
Click
Set
to enable the new password.
Firmware Upgrade
.
If you click
Firmware Upgrade
in the main screen (see
Figure 1-1 on page 1-3
), after you have
selected the switch to upgrade, the following screen displays:
.
Note:
You can also upgrade the firmware using the File Download screen of the switch
(see
“File Download” on page 6-20
).
Figure 1-6