Netgear GS108T GS108T Setup Manual - Page 84

RADIUS, Guest VLAN, Disable, Enable, VLAN List, Forward DOT1x EAPOL, Apply, Status, TO INTERFACE

Get Netgear GS108T - ProSafe - Gigabit Smart Switch PDF manuals and user guides
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

GS108T Smart Switch Software Administration Manual - RADIUS. Specifies that port authentication occurs through the RADIUS server. - None. Specifies that no authentication method is used to authenticate the port. • Guest VLAN: Specifies whether a guest VLAN is enabled on the device. At least one VLAN must exist to select one of the following radio buttons: - Disable. Specifies that a guest VLAN cannot be used for unauthorized ports. This is the default value. - Enable. Specifies that a guest VLAN can be used for unauthorized ports. If a guest VLAN is enabled, the unauthorized port automatically joins the VLAN selected in the VLAN List field. • VLAN List. Specifies a VLAN. Select an existing VLAN for the guest VLAN from the drop-down list. • Forward DOT1x EAPOL. When the port-based authentication state is disabled, you can enable or disable flooding EAPOL. Select one of the following radio buttons: - Disable. Specifies that EAPOL flooding is disabled. This is the default value. - Enable. Specifies that EAPOL flooding is enabled. 3. Click Apply to confirm any settings changes to the 802.1x configuration. 4. Under Port Settings, you can make changes to the port authentication setting for an individual port, for a group of ports, or for all ports simultaneously: • To change the port authentication setting for an individual port, select the check box to the left of its port number, and then select the authentication status. Note: You can also enter the interface number (that is, the port number) in the GO TO INTERFACE field, and then click GO. • To change the port authentication setting for a group of ports, select the check boxes to the left of their port numbers, and then select the authentication status. • To change the port authentication setting for all ports simultaneously, select the check box at the top of the column of check boxes, and then select the authentication status. The following port authentication settings are displayed. Only the Status field is configurable: • Port. Shows the port number. • Status. Specifies whether port authentication is enabled or disabled for the port. The possible field values are: 5-12 v1.0, December 2007 Configuring QoS and Security

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
GS108T Smart Switch Software Administration Manual
5-12
Configuring QoS and Security
v1.0, December 2007
–
RADIUS
. Specifies that port authentication occurs through the RADIUS server.
–
None
. Specifies that no authentication method is used to authenticate the port.
•
Guest VLAN
: Specifies whether a guest VLAN is enabled on the device. At least one
VLAN must exist to select one of the following radio buttons:
–
Disable
. Specifies that a guest VLAN cannot be used for unauthorized ports. This is
the default value.
–
Enable
. Specifies that a guest VLAN can be used for unauthorized ports. If a guest
VLAN is enabled, the unauthorized port automatically joins the VLAN selected in the
VLAN List field.
•
VLAN List
. Specifies a VLAN. Select an existing VLAN for the guest VLAN from the
drop-down list.
•
Forward DOT1x EAPOL
. When the port-based authentication state is disabled, you can
enable or disable flooding EAPOL. Select one of the following radio buttons:
–
Disable
. Specifies that EAPOL flooding is disabled. This is the default value.
–
Enable
. Specifies that EAPOL flooding is enabled.
3.
Click
Apply
to confirm any settings changes to the 802.1x configuration.
4.
Under Port Settings, you can make changes to the port authentication setting for an individual
port, for a group of ports, or for all ports simultaneously:
•
To change the port authentication setting for an individual port, select the check box to the
left of its port number, and then select the authentication status.
•
To change the port authentication setting for a group of ports, select the check boxes to the
left of their port numbers, and then select the authentication status.
•
To change the port authentication setting for all ports simultaneously, select the check box
at the top of the column of check boxes, and then select the authentication status.
The following port authentication settings are displayed. Only the Status field is configurable:
•
Port
. Shows the port number.
•
Status
. Specifies whether port authentication is enabled or disabled for the port. The
possible field values are:
Note:
You can also enter the interface number (that is, the port number) in the
GO
TO INTERFACE
field, and then click
GO
.