Netgear GS108T GS108T Setup Manual - Page 92
IP Address, Subnet Mask, Delete, Apply, To delete an IP access list
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
GS108T Smart Switch Software Administration Manual Figure 5-13 2. The following fields are displayed. Except for the ID field, all fields are configurable: • ID. Shows the identifier for the IP access list. • IP Address. Specifies the IP address for the IP access list. • Subnet Mask. Specifies the subnet mask for the IP access list. 3. Perform one of the following actions: To add an IP access list: a. Enter an IP address. b. Enter a subnet mask. c. Click Add. To delete an IP access list: a. Select the check box to the left of the ID for the IP access list that you want to remove. b. Click Delete. To change the subnet mask for an IP access list: a. Select the check box to the left of the ID for the IP access list that you want to change. b. Change the subnet mask. c. Click Apply. 5-20 v1.0, December 2007 Configuring QoS and Security