Netgear GS728TP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 118

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches Multicast Router VLAN Configuration The statically configured router attached (VLAN, interface) is added to the learned multicast router attached interface list if the interface is active and is a member of the VLAN. As is not the case in the previous release of the system firmware, snooping dynamic learning mode (snooping interface mode or snooping VLAN mode) does not need not to be enabled on the interface. The dynamic learning mode is applicable only for dynamically learned multicast router information (queries from an attached true querier).  To configure the Multicast Router VLAN: 1. Select Switching Multicast  MLD Snooping  Multicast Router VLAN Configuration. The following screen displays: 2. In the Interface field, select the interface ID. The entry corresponding to the specified interface is selected. 3. In the VLAN ID field, enter the VLAN ID for which the multicast router mode is to be enabled or disabled. 4. In the Multicast Router field, enable or disable multicast router on the selected interface. 5. Click APPLY to send the updated configuration to the switch. Configuration changes take place immediately. Static Multicast Address The Static Multicast Address link feature contains features described in the following sections: Configuring Switching Information 118