Netgear GS748TNA GS748Tv3 User Manual - Page 16
Network without DHCP Server, Configuring the Network Interface Card NIC settings on the host PC. - default ip
View all Netgear GS748TNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Smart Switch Software User Manual GS748T 6. Make a note of the displayed IP address assigned by the DHCP server. You will need this value to access the switch directly from a web browser (without using Smartwizard Discovery). 7. Select your switch by clicking on the line that displays the switch address. Then click Web Access. The discovery utility displays a login window similar to the following: Figure 2-2 8. Enter the default password which is password. Then, use your web browser to manage your switch. Network without DHCP Server This section describes how to set up your switch in a network without a DHCP server, and is divided into the following tasks: • Manually assigning network parameters for your switch. • Configuring the Network Interface Card (NIC) settings on the host PC. • Logging into the web-based switch management utility. 2-2 Using the Smartwizard Discovery Utility v1.0, October 2007