Netgear GS748TNA GS748Tv3 User Manual - Page 39

Select the interface or port that you want to modify., To modify a PVID

Get Netgear GS748TNA PDF manuals and user guides View all Netgear GS748TNA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Smart Switch Software User Manual GS748T • Tag All: Add all the ports to this VLAN and tag all egress packets. • Remove All: Remove all the ports from this VLAN. 3. Click the Unit link to display all available ports. 4. Toggle the check box for each port to change its membership and tag setting: • An empty check box indicates that the port is not a member of this VLAN. • T indicates that the egress packet is tagged. • U indicates that the egress packet is untagged. 5. Click Apply. Figure 4-12 Note: Every port has an initial default VID of 1 (PVID = 1). Whether a port has this VID or has been made a member of another default VID, you cannot remove any port from its prior default VLAN until you have reassigned its PVID to its new value. Use the PVID Setting menu option of VLAN Management to change its PVID before attempting to remove it from its prior default membership. The PVID Configuration table contains parameters for assigning Port VLAN ID (PVID) values to interfaces. All ports must have a defined PVID. If no other value is specified, the default VLAN PVID is used. If you want to change the port's default PVID, you must first create a VLAN group that includes the port. To modify a PVID: 1. Select the interface or port that you want to modify. 2. In the PVID field, enter a valid VLAN ID. Configuring the Switch 4-9 v1.0, October 2007

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Smart Switch Software User Manual GS748T
Configuring the Switch
4-9
v1.0, October 2007
•
Tag All: Add all the ports to this VLAN and tag all egress packets.
•
Remove All: Remove all the ports from this VLAN.
3.
Click the
Unit
link to display all available ports.
4.
Toggle the check box for each port to change its membership and tag setting:
•
An empty check box indicates that the port is not a member of this VLAN.
•
T
indicates that the egress packet is tagged.
•
U
indicates that the egress packet is untagged.
5.
Click
Apply.
The PVID Configuration table contains parameters for assigning Port VLAN ID (PVID) values to
interfaces. All ports must have a defined PVID. If no other value is specified, the default VLAN
PVID is used. If you want to change the port's default PVID, you must first create a VLAN group
that includes the port.
To modify a PVID:
1.
Select the interface or port that you want to modify.
2.
In the PVID field, enter a valid VLAN ID.
Figure 4-12
Note:
Every port has an initial default VID of 1 (PVID = 1). Whether a port has this
VID or has been made a member of another default VID, you cannot remove
any port from its prior default VLAN until you have reassigned its PVID to its
new value. Use the PVID Setting menu option of VLAN Management to
change its PVID before attempting to remove it from its prior default
membership.