Netgear GS748TNA GS748Tv3 User Manual - Page 29
From the main menu, Maintenance > Reset > Factory Default. The Factory Default screen will
View all Netgear GS748TNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Smart Switch Software User Manual GS748T • You want to make a major configuration change for another reason. Warning: Restoring Factory Defaults erases any prior user configuration. You can perform a Factory Reset using either of the following methods: • From the main menu, Maintenance > Reset > Factory Default. The Factory Default screen will display. • Select the Check this box and click Apply below to reboot and return all configuration settings to default values check box and then click Apply, or • Press the Factory Defaults button on the right-hand side of the front panel. The effect of each of these alternatives is identical. Performing a Device Reboot restarts the system. Your configuration settings remain intact. You can reboot the switch externally by either: • Power cycle it by disconnecting and reconnecting the power cord, or • Use the Reset button on the left-hand side of the front panel. This operation does not disturb your switch configuration. To reboot the switch from the switch GUI: 1. Select Maintenance > Reset > Device Reboot. The Device Reboot screen will display. 2. Select the Check this box and click APPLY below to reboot unit checkbox. 3. Click Apply. Figure 3-7 Basic Web Management 3-7 v1.0, October 2007