Netgear GSM4248P User Manual - Page 143

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 40. PoE port information (Continued) Field Status Description The operational status of the port: • Disabled: No power is delivered. • Delivering Power. Power is being drawn by the PD. • Requesting Power: The port is requesting power. • Fault: A problem occurred with the power. • Test: The port is in test mode. • Other Fault: The port is idle because of an error condition. • Searching: The port is not in one of the other states in this list. Fault Status The error description when the PoE port is in a fault state: • No Error: The port is not in any error state and can provide power. • MPS Absent: The port detected the absence of the main power supply, preventing the port from providing power. • Short: The port detected a short circuit condition, preventing the port from providing power. • Overload: The PD that is connected to the port attempts to draw more power than allowed by the port's settings, preventing the port from providing power at all. • Power Denied: The port was denied power because of a shortage of power or because of an administrative condition. In this condition, Power-cycle one or more PoE ports You can power-cycle one or more PoE ports. This might be useful if PoE ports function not as expected. To power-cycle one or more PoE ports: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. Configure Switch System 143 Information Main User Manual