Netgear GSM4248P User Manual - Page 43

AV Line of Fully Managed Switches M4250 Series Main User Manual The falling utilization threshold must be equal to or less than the rising threshold value. The falling utilization threshold notification is generated only if a rising threshold notification was generated previously. Configuring the falling utilization threshold and time period is optional. If the falling CPU utilization values aare not configured, they take the same value as the rising CPU utilization values. The range is a percentage from 1 to 100. • Falling Interval: Configure the falling interval. YOu can configure the utilization monitoring time period from 5 seconds to 86400 seconds in multiples of 5 seconds. • Free Memory Threshold: Configure the CPU free memory threshold value in KB. 7. Click the Apply button. Your settings are saved. 8. To save the settings to the running configuration, click the Save icon. View or clear switch statistics To view or clear the switch statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > Management > Switch Statistics. The Switch Statistics page displays. 6. To clear all the counters, resetting all switch summary and detailed statistics to default values, click the Clear button. The discarded packets count cannot be cleared. 7. To save the settings to the running configuration, click the Save icon. The following table describes switch statistics information. Configure Switch System 43 Information Main User Manual