Netgear GSM4248P User Manual - Page 65

AV Line of Fully Managed Switches M4250 Series Main User Manual 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > Management > Management Interfaces > IPv6 Management Interface Configuration. The IPv6 Management Interface Configuration page displays. 6. To add an IPv6 default route address, in the IPv6 Default Route Configuration section, do the following: a. Select the Change IPv6 Default Route check box. b. In the IPv6 Default Route Address field, specify the IPv6 address and prefix length that you want to add. c. Click the Add button. The IPv6 default route address is added to the IPv6 management interface. 7. To remove an IPv6 default route address, in the IPv6 Default Route Configuration section, do the following: a. Select the check box for the IPv6 default route address that you want to remove. b. Click the Delete button. The IPv6 default route address is removed from the IPv6 management interface. 8. To save the settings to the running configuration, click the Save icon. Time and SNTP settings The switch supports the Simple Network Time Protocol (SNTP). As its name suggests, it is a less complicated version of Network Time Protocol (NTP), which is a system for synchronizing the clocks of networked computer systems, primarily when data transfer is handled through the Internet. You can also set the system time manually. Configure the time setting manually To configure the time setting manually 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. Configure Switch System 65 Information Main User Manual