Netgear GSM4248P User Manual - Page 460

AV Line of Fully Managed Switches M4250 Series Main User Manual maximum bandwidth configuration. It is effectively a second-level shaping mechanism. The default value is 0. The value 0 means that the maximum is unlimited. 10. Click the Apply button. Your settings are saved. 11. To save the settings to the running configuration, click the Save icon. Configure CoS queue settings for an interface You can define what a particular queue does by configuring switch egress queues. You can control how much bandwidth is used by the queue, the queue depth during times of congestion, and the scheduling of packet transmission from all queues on a port. Each port contains its own CoS queue-related configuration. For information about configuring CoS queue settings globally, see Configure the CoS trust mode settings globally or for a specific interface on page 455. To configure the CoS queue settings for an interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > CoS > Advanced > Interface Queue Configuration. The Interface Queue Configuration page displays. 6. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch): Only physical interfaces are displayed. This is the default setting. • LAG: Only LAGs are displayed. • All: Both physical interfaces and LAGs are displayed. 7. Select one or more interfaces by taking one of the following actions: Configure Quality of Service 460 Main User Manual